Table of Contents
Advertisement
- Thickness Gauge
Cassette Tape (C-120)
@
Before adjusting the mechanism of the unit, clean the tape
NOTE:
Silicone grease is not applied to the Replacement Parts.
®
Never apply grease or oil to the ASO Beit. if applied, wipe it
clean with benzine.
Ne
Flywheel Thrust
Adjustment
S|
0.09 — 0.17mm
Flywheel
~ or giue.
TAKE-UP TORQUE ADJUSTMENT
1.
Insert
the
cassette-type
torque
meter
into
the unit and
measure the torque of the Take-up Ree! Gear with the unit
in the playback mode. It should be 30 — ood: -cm.
2.
If necessary,
adjust
the torque
by moving
the
Friction
Spring of the Friction Assembly as illustrated.
Take-up Torque: 30 — 50g-cm
Friction Assembly
|
Friction Spring.
Friction Spring
NOTE:
If the Take-up Reel Gear and the Take-up Gear run idle and
produce
an abnormal
sound, adjust the take-up torque as
low as possible.
MUTING SWITCH ADJUSTMENT
This Switch
is normally closed. The clearance between the both
contacts of the switch should be 0.5 — 1.0mm with the PLAY
button down.
Switch
0.5 — 1.0mm
Move the
Switch.
ay
Advertisement
Table of Contents
