MikroTik CCR1036-8G-2S+ Series Manual

CCR1036-8G-2S+-series
CCR1036-8G-2S+
CCR1036-8G-2S+EM

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations. All Mikrotik devices must be professionally installed.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take
adequate measures.

Quick start

The Ethernet port 1 has a default IP address for connecting: 192.168.88.1. Username is admin and there is no password (or, for some models, check user
and wireless passwords on the sticker)
password, and update the device.
Connecting the device to the internet:
Connect your ISP Ethernet cable to the Ethernet port1;
Connect with your PC to the Ethernet port3;
Open WinBox on your computer and check Neighbors tab for CCR;
Choose the device and connect;
Choose Quick Set on the left side of the screen;
Set address Acquisition to automatic, or enter your Network details manually;
Set your local Network IP Address 192.168.88.1;
Type a secure password in the Password field and confirm again;
Click Apply;
The device will receive an IP if your Network has DHCP server enabled, or if you have entered Network details correct and internet connection
will be available.
Click on the Check for updates and on newly opened window choose Download&Install if new version if available.
You are ready to use your device.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: https://mt.lv/help
address of the device from the LAN side
. The device doesn't have any other configuration applied by default, please set up WAN IP addresses, user
. In case the IP connection is not available, the Winbox tool ( https://mt.lv/winbox ) can be used to connect to the MAC