Kenwood DNX7120 Instruction Manual page 52

Hands Free Unit Control
Q
• While your car is moving, some functions are disabled for
safety's sake.The buttons associated with the disabled
functions become ineffective if pressed.
• When the Hands Free Control screen appears, the name
of the connected cell phone is displayed for 5 seconds.
• _ Since the number of steps of the control unit is different
from that of the cell phone, the statuses displayed on
the control unit may discord from those displayed on
the cell phone. No status is displayed if information
about it cannot be obtained.
• Setting the cell phone in the private mode can disable
the hands free function.
_ ,'I_IT, _ IB'l[it_l I I
When you receive a call, you can use the hands
free phone,
When a call arrives, the Talking screen appears
automatically.
i l Starts conversation with a person called.
Switches the call destination if you hear a
tone of call-waiting.
Resumes conversation with the person on
hold after completed conversation with the
other party.
i2 Disconnects the phone.
is Switches the voice output between phone
and speaker.
i,1 Outputs dial tone.
See <Controlling Tone-based Services>
(page 53).
Make a call by entering a phone number,
Display the number input screen
Enter a phone number
ill Callsthe entered phone number.
j2 Createsan SMS for the entered phone
number.
See <SMS (Short Message Service)> (page
6]).
i3] Clears the number.
i4 Returns to the previous screen.
Make a call
You can start talking when the destination
responds.
End the call
The Hand Freescreen reappears.
Q
• You can input max 32 digits.
52 C_ DNX7120/DDX712/DDX7032