Table of Contents
Advertisement
SUPPLEMENTARY
INFORMATION
ERROR MESSAGES
The RX8 displays the following messages when
it encounters an unexpected
condition:
Memory Full !
While creating, editing or copying a pattern or song, you have
exceeded the capacity of the pattern or song memory.
Too Large РТМ !
While creating or editing a pattern, you have exceeded
the
capacity of a single pattern. There is a limit to the complexity of
а single pattern.
Шера! Input !
In Song Edit mode, Copy Part job, the copy destination was one
of the copy source parts.
Not Found !
In Song Edit mode, Copy Part, Insert Part or Delete Part jobs,
nonexistant (unwritten) part numbers were specified.
Part Overflow !
In Song Edit mode, Copy Part job, copying would result in more
than 999 parts.
MIDI Buffer Full !
The RX8
has received
MIDI data faster than it was able to
process it.
Change Battery !
The RX8's internal memory backup battery voltage has dropped
below 2.2 V. Contact your local Yamaha dealer for a replace-
ment.
No Battery !
The RX8's internal memory backup battery voltage has dropped
below 1.5V. and internal data is no longer backed up. Contact
your local Yamaha dealer for a replacement immediately.
No Card Battery !
The backup battery in the memory card inserted into the RX8's
rear panel CARD
slot has dropped below 2.2V. Purchase and
install a replacement battery in the card as explained in the card
instructions.
Note:
Press any main mode switch to exit from the "MIDI Buffer
Full" message.
Press +1/YES
to exit from the above low
battery warning messages.
44
Advertisement
Table of Contents
