Advertisement
(Example of setting it at 18:25)
Switching on the main power switch
1. Set the main power switch [POWER ©/ CO] to [®], and the power standby indicator (@) and "-: -- " will appear
in the display.
To set the clock setting mode
2. Press [CLOCK/TIMER/SLEEP] so that "CLOCK" appears in the display. It will be displayed for seconds. lf
it disappears, press the same button again.
To set the current hour
3. With "CLOCK' in the display, press either [SET +] or [SET —] repeatedly or continuously to set the current hour.
4. Then press [CLOCK/TIMER/SLEEP].
To set the current minutes
5. Press either [SET +] or [SET —] repeatedly or continuously to set the current minutes.
6. Then press [CLOCK/TIMER/SLEEP] by a time signal.
NOTE:
Clock setting mode will be cancelled unless you press [CLOCK/TIMER/SLEEP] within 60 seconds. In
that case, repeat the operation steps 2.~ 6.
To call the clock in the display
7. Press [CLOCK/TIMER/SLEEP], and the current time will appears for 5 seconds.
To reset the clock
Follow the operation steps 2.~ 6. of the SETTING THE CLOCK.
TIP: The clock is displayed when the set is in power stand-by status.
13
Advertisement
