Table of Contents
Advertisement
Removing the Blade Assembly
1.
Park the machine on a level surface and engage
the parking brake.
2.
Raise the attachment a few inches off the
ground for easier access.
3.
Shut off the machine, and remove the key.
4.
Loosen the 4 bolts on the blade-holder clamp 2
turns counterclockwise.
WARNING
Removing the bolts can cause the clamp
to not securely hold the blade, which can
slip and injure you.
Only loosen the bolts; do not remove
them.
1. Bolt (4)
5.
Remove the blade
Figure 5
2. Blade
6.
Remove the locking pin and the blade-holder
assembly.
1. Locking pin
g371177
8
Figure 6
2. Blade-holder assembly
g371176
Advertisement
Table of Contents
