Sharp 40FD2K User Manual page 32

Adjusting settings while watching a programme
Press STAR to display the TV settings menu. Press UP or DOWN to highlight an option, and then press LEFT
or RIGHT to change the setting. The topic Adjusting TV settings explains each of the settings in detail.
Pausing live TV
Only on certain models, Live TV Pause gives your Roku TV the ability to pause, play, fast forward and rewind
broadcast TV. You can pause TV for up to 90 minutes.
Requirements
To use this feature, you need to:
1. Connect your TV to a Roku account. If you didn't connect during Guided Setup, see Connecting your TV.
2. Provide your own USB flash drive (thumb drive) with the following minimum specifications.
• 16 GB
• 15 Mbps read/write speed
• USB 2.0 compliant
A USB flash drive (thumb drive) meeting the minimum requirements is highly recommended over an exter-
nally powered hard disk drive. Note that you can use any larger size drive – there is no limit to the maximum
size – but using a larger drive does not extend the 90-minute pause time.
Important: After warning you and giving you a chance to cancel Live TV Pause set-up, all existing content
on your USB drive is erased when you enable this feature.
3. Connect your USB drive to the TV's USB port.
Important: Some TV models have more than one USB port. You can connect your Live TV Pause USB drive
to any port, but make sure that nothing is connected to other USB ports while enabling Live TV Pause. Re-
connect other USB devices after you have finished enabling Live TV Pause.
4. Enable Live TV Pause, as explained in the following topic.
Enabling Live TV Pause
You can start setting up Live TV Pause in any of the following ways:
• After completing a channel scan, select Set up Live TV Pause from the available options.
• Press PLAY/PAUSE
• Highlight the Live TV input on the Home screen, press
After starting set-up of Live TV Pause in any of these ways, the TV prompts you through the steps needed to
enable this feature. Set-up takes only a few moments.
Note: Use of a USB hub is not supported.
Using Live TV Pause
If you have used the Roku remote to watch streaming channels, using Live TV Pause should be very familiar to
you.
• While watching a TV programme, press PLAY/PAUSE to pause or play the content. After the TV programme
has been paused for 90 minutes, the TV resumes playing from the point in the programme where you paused
it.
• After watching a channel for a while, press REWIND
watching the channel; up to 90 minutes.
• After pausing or rewinding, press FAST FWD
ing the live TV programme.
• Press FAST FWD
play back the last several seconds of the programme.
• When the programme is paused, press LEFT or RIGHT to move backwards or forwards through the pro-
gramme; approximately 10 seconds per press. Small frames appear across the screen to identify your location
in the programme.
Whenever you use any of the Live TV Pause features, the TV momentarily displays a progress bar:
32
on the Roku remote while watching a live TV channel.
or REWIND repeatedly to cycle through 1x, 2x and 3x skip speeds. Press
STAR, and then select Enable Live TV Pause.
to jump back to the point where you first started
to jump ahead to the point where you are once again watch-
REPLAY to