Software Installation; System Requirements And Prerequisites - Norav Medical PC-ECG 1200 User Manual

Document
Title:
Document
No.:
•
Take care not to let fluid "pool" around connection pins. If this should happen, blot dry with a soft,
lint-free cloth.
•
DO NOT use excessive drying techniques, such as oven, forced heat or sun drying.
Calibration
The device does not need any calibration.

SOFTWARE INSTALLATION

System Requirements and Prerequisites

Note:
PC Minimum Configuration
Application
Resting ECG
"Monitoring" ECG
LP
HRV
Stress
ECG
*a – a port for a standard local printer or for a LAN printer not included in the required free port calculations
*b – old model 1200M/S device might require a 1200USB adapter
*c – use a USB-to-COM standard adapter or a direct RS232 port instead of the USB port
*d – use a USB-to-LPT adapter or direct to the LPT port instead of USB port
Printers
Application
Resting ECG
"Monitoring" ECG
LP
Norav Users Guide PC-ECG 1200
NV- Document Rev.:
54/PCECG1200 211130
Install the software before installing the hardware. If the device is connected to the
PC, disconnect the device before installing the software.
Intel i3 or similar
Intel i3 or similar
Intel i3 or similar
ECG Device only
Treadmill/Ergometer
Intel i5 or similar
Blood pressure device
MP 200 Thermal printer
The computer must meet the requirements of the Standard for Information Technology
Equipment (IEC/EN 60950-1)
Technology
LASER/INK
LASER/INK
LASER/INK
NV-54/PCECG1200
Document Date:
21.12.2023
CPU
RAM amount
performance (GB)
1.0
1.0
1.0
Intel i3 or same 1.0
2.0
RAM Memory
(MB)
2
2
2
Revision 2111303
Page 14 of 53
Disk free Free USB
space (GB) Ports (*a)
2 1 (*b)
20 1 (*b)
2 1 (*b)
2 1 (*b)
1 (*b)
+1(*c)
20
+1(*c)
+1(*d)
Driver
Vendor / MS
Vendor / MS
Vendor / MS