Keychron Q0 Plus - Customizable Keyboard Manual

Table of Contents

Contents

1 Fully Assembled Version
2 Barebone Version
3 Quick Start Guide
4 Q0 PLUS CUSTOMIZABLE KEYBOARD SPECIFICATIONS
5 Q0 PLUS MECHANICAL KEYBOARD OVERVIEW
6 DEFAULT KEY LAYOUT
7 KEY DESCRIPTION
8 Safety Precaution
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Fully Assembled Version

Keyboard
1x Fully Assembled Keyboard
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
3 Sets x Stabilizers
1 Set x Keycaps (PBT Double-shot)
1 Set x Switches

Cable
1x Type-C to Type-C Cable
1x Type A to Type-C Adapter

Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key

Barebone Version

Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
3 Sets x Stabilizers

Cable
1x Type-C to Type-C Cable
1x Type A to Type-C Adapter

Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key

Quick Start Guide

The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys.

If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

Factory Reset

Troubleshooting? Don't know what's going on with the keyboard?

Try factory reset by pressing 0 + 9 + 1 (for 4 seconds)
Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
Removethe "0" and "." keycap to find the reset button on the PCB.
Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
Flash the firmware with the QMK Toolbox.
Factory reset the keyboard again by pressing 0 + 9 + 1 (for 4 seconds)

* Step by step guide can be found on our website

Q0 PLUS CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Specifications
Layout	Numpad
Switch type	Mechanical
Width	137 mm
Length	118.2 mm
Front height	20.1 mm (without keycaps) 30 mm (with keycaps installed)
Back height	32.6 mm (without keycaps) 41.5 mm (with keycaps installed)
Keyboard feet height	1.9 mm
Angle	5.26 degree

Q0 PLUS MECHANICAL KEYBOARD OVERVIEW

DEFAULT KEY LAYOUT

LAYER 0: This layer will be activated when your keyboard is connected.

LAYER 1: This layer will be activated when you press the fn/MO(1) key.

KEY DESCRIPTION

Key Description
Scr-	Screen Brightness Decrease
Scr+	Screen Brightness Increase
Bright-	Backlight Decrease
Bright+	Backlight Increase
Prvs	Previous
Play	Play/Pause
Next	Next
Mute	Mute
Vol-	Volume Decrease
Vol+	Volume Increase
RGB Toggle	Turn Backlight on/off
RGBMd+	RGB Mode Next
RGBMd-	RGB Mode Previous
Hue+	Hue Increase
Hue-	Hue Decrease
RGB SPI	RGB Speed Increase
RGB SPD	RGB Speed Decrease
MO(1)	Layer 1 will be activated when holding this key

Third-party input tools are not compatible with the keyboard.

Due to compatibility, versions, brands and drivers of Windows/macOS, functionalities of third-party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.

Certain multimedia keys or function keys do not work.

Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices.

*Multimedia keys:

Function keys:

Safety Precaution

Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards.

Always keep the product dry to avoid corrosion.

Do not expose the product to extreme temperatures below -10ºC (5ºF) or above 50ºC (131ºF) to preserve the lifespan of the keyboard.

Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
@keychron
@keychron
@keychronMK
Designed by Keychron