TABLE OF CONTENTS Sena Marine App ABOUT THE NAUTITALK Bosun 1.1 Product Features 1.2 Product Details 1.3 Package Contents 1.4 Wearing the Headset with Headband Strap GETTING STARTED 2.1 Charging 2.2 Legend 2.3 Powering On and Off SMARTPHONE USAGE 3.1 Phone Pairing 3.2 Making and Answering Calls...
Sena Marine App Download the Sena Marine App at Google Play Store Store. Sena Marine • Device configuration • Over-The-Air (OTA) Firmware Update Sena Technologies Co., Ltd. Customer Support: sena.com NAUTITALK Bosun Yachting Headsets | 4...
Bluetooth ® • Sena Marine App * Headset with Floating Marker Buoy attached. 1.2 Product Details Multi-function Button (+) Button Status & Charging LED Mesh Intercom Button (-) Button Magnetic DC Power Charging Port NAUTITALK Bosun Yachting Headsets | 5...
NAUTITALK Bosun Microphone Sponges (Magnetic USB-C) Extra Floating Marker Headband Strap Buoy 1.4 Wearing the Headset with Headband Strap You can adjust the length of the headband strap to reduce stress on your ears. NAUTITALK Bosun Yachting Headsets | 6...
• It is recommended to remove the headset before charging. The headset will automatically turn off while charging. • Any 3rd party USB charger can be used with Sena products if approved by FCC, CE, IC, or other locally approved agencies.
1. Press and hold the Multi-function Button for 3 sec until you hear “Phone Pairing.” Blinking HOLD “Phone pairing” 2. Select NAUTITALK Bosun in the list of Bluetooth devices detected. Bluetooth NAUTITALK Bosun Device B Note: Multipoint allows you to use up to two phones at the same time.
3 SMARTPHONE USAGE 3.3 Speed Dialing 3.3.1 Assigning Speed Dial Presets Speed Dial Presets can be assigned through the Sena Marine App. 3.3.2 Using Speed Dial Presets 1. Press and hold the (+) Button for 3 sec until you hear “Speed dial.”...
Freely communicate with virtually unlimited users in each of the 9 available channels. 4.2 Starting Mesh Intercom Mesh Intercom On Blinking “ Mesh intercom on, channel 1” Mesh Intercom Off “ Mesh intercom off” NAUTITALK Bosun Yachting Headsets | 10...
• The channel will be saved even if you turn off the NAUTITALK Bosun. • The Sena Marine App can also be used to change the channel. 4.4 Mute/Unmute Mic (Default: Unmute) Use the Mesh Intercom Button to mute/unmute the microphone in any Mesh channel.
You can request nearby* friends to turn on Mesh Intercom: 1. To send or receive a request message, you must enable Mesh Reach-Out on the Sena Marine App. Please refer to Section 5.1: “Configuration Setting.” 2. While your headset’s Mesh Intercom is on, you can send a request message using the Mesh Intercom Button or the Sena Marine App.
Page 13
5.2 Firmware Updates To update the firmware, use our Over-The-Air (OTA) Firmware Update in our Sena Marine App. Note: Do not turn off the headset while updating the firmware, as doing so may damage the product. NAUTITALK Bosun Yachting Headsets | 13...
Page 14
6. TROUBLESHOOTING Please visit sena.com for more troubleshooting information. 6.1 Factory Reset If you wish to erase all of your settings, the headset can be restored to factory default settings using the Factory Reset feature. • Press and hold the Multi-function Button for 10 sec until you hear “Headset reset, good-bye.”...
Page 15
Phone Call a Voice Assistant Usage HOLD Speed Dial HOLD Play/Pause music HOLD Track forward/backward Mesh Intercom On Mesh Intercom Off Mesh Channel setting Intercom™ HOLD Mute/Unmute Mic Mesh Reach-Out Request HOLD Factory Reset NAUTITALK Bosun Yachting Headsets | 15...
Page 16
Sena Technologies Co., Ltd. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies Co., Ltd. or its subsidiaries in the USA and other countries. NAUTITALK Bosun™, NAUTITALK N2R™ are trademarks of Sena Technologies Co., Ltd.
Need help?
Do you have a question about the NAUTITALK Bosun and is the answer not in the manual?
Questions and answers