Advertisement
F06 Cabin Filter Installation Guide
1. How to remove the glove box
1. Open the glove box
2. Remove the damper on the far left of the opened glove box while
pulling it
3. Whilst pushing the sides of the glovebox inward, pull the glovebox
towards yourself to remove the stoppers
4. Press inwards on both sides and pull the glove box towards yourself
to remove
Enlarged
view
Damper
Stopper
Robert Bosch (Australia) Pty. Ltd.
1555 Centre Road
Clayton VIC 3168
For Further information please contact Bosch on:
Email: CustomerService.AA@au.bosch.com
Australia: 1300 307 040 www.boschaftermarket.com.au
New Zealand 0800 452 896 www.boschaftermarket.co.nz
2. Removing and installing the cabin filter
Stopper
•
•
•
•
Knobs
Attention
This work procedure is an example and may vary across different vehicles.
Bosch's cabin filter indicates airflow with an arrow on the product. Please note that the
arrow may indicate "TOP" on other genuine or IAM products.
Please read the "Precautions for installation and use" on the installation guide cover be-
fore commencing.
NOTE: used cabin filters cannot be cleaned and reused.
1. Pinch the knobs on the
filter cover and pull
the filter cover towards
yourself.
2. Pull the filter towards
yourself to remove it.
3. Insert your Bosch
cabin filter with the "AIR
FLOW"arrow pointing
down.
4. Restore the removed
vehicle parts to their
original positions.
Advertisement
