Related Manuals for Wilcox G24
Summary of Contents for Wilcox G24
- Page 1 OPERATION AND MAINTENANCE INSTRUCTIONS FOR THE Breakaway Horn Interface Mount PN: 28300G24 “The Most Trusted Helmet Mount in the World” CAGE: 004F1 EAR99 NLR: No Export License Required. 5 February, 2024 28300M03 Rev. A-14...
- Page 2 CONFIGURATION ATTACH/DETACH - ATTACH/DETACH THE G24 MOUNT TO/FROM THE WILCOX FAMILY OF SHROUDS WILCOX ATTACH MOUNT ONE-HOLE SHROUD DEPICTED Push (1) to allow the release mechanism to accept the mount into the shroud. Position the mount on an angle to insert the interface lip (2) into the interface receiver (3).
- Page 3 ATTACH/DETACH (CONTINUED) WILCOX THREE-HOLE SHROUD DEPICTED Once the lip is fully engaged in the receiver, pivot the mount into the pocket (4). Once seated, push (5) to lock the helmet mount to the shroud. DETACH MOUNT Follow the attachment instructions in reverse.
- Page 4 ATTACH/DETACH SHOE - ATTACHMENT OF AN NVG ATTACH SHOE Insert the dovetail shoe (1) into the receiver (2) of the G24 Mount and push in until you hear a click. Gently pull on the NVG to make sure it is securely mounted.
-
Page 5: Operation
OPERATION PIVOT - STOWING AND DEPLOYING THE NVG Push the flip release button (1) and position the Carriage in the stowed or operational position. Release the button to lock in place. 130° OF ROTATIONAL TRAVEL UP/DOWN - ADJUSTMENT OF THE NVG Placing the Lock Lever (1) in ILLUSTRATED LOCKED... - Page 6 FORE/AFT - ADJUSTMENT OF THE NVG Simultaneously push both buttons (1) in to move the Carriage forward or backward. Release the buttons to lock. 1.3 IN. FORE/AFT TRAVEL TILT - ADJUSTMENT OF THE NVG Turn the tilt angle adjustment knob (1) CW to raise the angle or CCW to lower the angle.
-
Page 7: Care And Maintenance
Mount, and NVG Shoe to work as one system. Any off-brand shrouds could affect the rigidity, thereby affecting the stability of the goggle. An extensive amount of effort is put into this, and Wilcox cannot honor a warranty claim if an off-brand shroud is used with our mount. -
Page 8: General Safety Warnings
GENERAL SAFETY WARNINGS ▲ WARNING ▲ To prevent potential neck injury when performing operations that could cause entanglement with parachute lines or when fast roping, make sure the breakaway feature is enabled. BREAKAWAY - ENABLE OR DISABLE THE FEATURE ENABLE Push in Lever (1). - Page 9 One Wilcox Way Newington, NH 03801 USA The Wilcox product must be securely packaged to prevent damage, accompanied by your name, address, daytime phone number to contact you, and a description of the problem or work you wish to be performed.
- Page 10 ” are federally registered trademarks of Wilcox ® Industries Corp. “G24” is a trademark of Wilcox Industries Corp. All other trademarks and registered trademarks in this manual are the property of their respective companies. Specifications and other data are subject to change without notice.
Need help?
Do you have a question about the G24 and is the answer not in the manual?
Questions and answers