Table of Contents
Advertisement
TECHNICAL SUMMARY
ELECTRICAL
EBI-3657
Input Power
116/117/125 volts
a
-e,
50/60 cycles, 6.5 amps.
at
approximately
800 watts (from the
a
-c
line to the rack
mounted
equipment).
110/117/125 volts
a
-c,
50/60 cycles (for
Master Monitor
and console blower), 1.5 amps
at
approximately
130 watts (from
the
a
-c
line to the
Interconnecting Panel).
Input Signals
Sync Generator
Horizontal
drive
411/2 volt
Vertical drive
4±1/2 volt
Blanking
4±1/2
volt
Sync
4±1/2 volt
Output Signals
2
Non -composite video:
1
volt each
2
Either composite
or non
-composite video:
1
volt
plus sync.
MECH4NICAL
The
mechanical specifications for each individual
unit are
given in their associated instruction book.
These books are listed
im the
EQUIPMENT section.
INSTALLATION
GENERAL
All
the units
which make-up
the Typo PE -21-A
Vidicon Film
Camera Channel, aroeshippod with ail
the
tubes installed in
the
units.
The Vidicon tube has not been installed in the Vidicon
Camera and must, therefore,
be
installed
by service personnel. The
installation procedure for
the
Vidicon tube
is
dnscribed'in
the
Installation
of
Vidicon Tube section.
2
Advertisement
Chapters
Table of Contents
