Select The Required Programme; Select The Spin Speed Or The Rinse Hold Option - Electrolux WA 1356 F User Manual

Select the required programme

You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see Washing Programmes).
Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.
The Start/Pause light starts to flash and the Display shows the duration of the
selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position O (Aus
Arrêt) to Reset programme/Switching OFF of the machine.
At the end of the programme the selector dial must be turned to
position O (Aus Arrêt), to switch the machine off.
Attention!
f you turn the programme selector dial to another programme when the
I
machine is working, the Yellow Start/Pause pilot light will flash 3 times and the
message Err is displayed on the display to indicate a wrong selection. The
machine will not perform the new selected programme.

Select the spin speed or the rinse hold option

Press the Spin button repeatedly to change the spin speed, if you want your
laundry to be spun at a speed different from the one proposed by the washing
machine. The relevant light will light up. The maximum spin speed for cotton
programmes is 1300 rpm.
For the maximum spin speed forseen for each programme consult the
chapter«Washing programmes».
Rinse Hold (Spülstopp/Anti-Froissage): by selecting this option the water of
the last rinse is not emptied out to prevent the fabrics from creasing. When the
programme has finished the display shows a
(Tür/Porte) illuminates, the Start/Pause and «Washing» (Waschen/Lavage) lights
go off and the door is blocked to indicate that the water must be emptied out.
To empty the water out:
turn the programme selector dial to
●
select the Drain or Spin programme
●
reduce the spin speed if needed, by means of the relevant button
●
depress Start/Pause button
●
when the programme has finished the display shows a
●
Door goes off and the door can be opened.
0 flashing, the pilot light Door
O
Use
0
flashing. The pilot light
15