Black & Decker BEGAS5800 Original Instructions Manual page 8

ENGLISH
Always stand clear of the discharge
u
zone when operating this appliance.
When feeding material into the
u
appliance be extremely careful that
pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
If the cutting mechanism strikes any
u
foreign objects or if the appliance
starts making any unusual noise
or vibration, turn the appliance off,
remove the plug from the mains and
allow the appliance to stop.
Inspect the appliance for damage.
u
Check for and tighten any loose
u
parts.
Have any damaged parts replaced
u
or repaired with original parts by an
authorised repair agent.
Do not allow processed material to
u
build up in the discharge zone; this
may prevent proper discharge and can
result in kickback of material through
the feed intake opening.
If the appliance becomes clogged, turn
u
the appliance off, remove the plug from
the mains and allow the appliance to
stop before clearing debris.
Keep all guards and deflectors in place
u
and in good working condition.
Do not transport or tilt the appliance
u
whilst in operation.
Do not leave the appliance
u
unattended. Whenever you leave
the work area, turn the appliance off,
remove the plug from the mains and
allow the appliance to stop.
8
(Original instructions)
Children must be supervised to ensure
they do not play with the appliance.
Do not tilt the appliance while the
u
power source is running.
Always disconnect the supply:
u
before clearing a blockage;
u
before checking, cleaning or working
u
on the machine;
after striking a foreign object to
u
inspect the machine for damage;
if the machine starts to vibrate
u
abnormally;
Maintenance and storage
When the appliance is stopped for
u
servicing, inspection, or storage, or
to change an accessory, turn the
appliance off and remove the plug
from the mains.
Make sure that all
moving parts have come to a complete
stop before making any inspections,
adjustments, etc.
Store the appliance in a dry and locked
u
location. Children should not have
access to stored appliances.
Labels on appliance
The following pictograms are shown on
the tool along with the date code
(19) which also includes the year of
manufacture, is printed into the housing.
Example:
2023 XX XX:
Warning! Read the manual prior
:
to operation.