Panasonic NN-8850 Operating Instructions Manual page 14

Auto Sensor Cook (NN-8850/NN-8800)
eSelect desired Category. elf desired press the More/Less ePress the Start Pad.
Pad. By pressing the Pad once
(+) the cooking time is
increased by about 10%, by
pressing the Pad twice (—) the
cooking time is decreased by
about 10%.
Note:
After the burst of steam is detected by the Sensor, the display is changed from the program number to the remaining
and the oven switches off, the glass tray stops rotating, the oven light turns off and the digital display switches to the
clock time.
For optimal results the food to be cooked with the auto sensor program always has to be covered.
Notes on the auto sensor cook:
1. When opening the door the operation is interrupted but the program is not cancelled. Close the door and press the
Start Pad to continue cooking. During the auto sensor cooking the door should not be opened as long as the
program number is displayed. When the remaining time is displayed the door may be opened for turning and stirring
the food.
2. During cooking of food in the microwave oven steam develops. This steam is sensed by the humidity sensor and
the remaining cooking time is calculated by the microwave oven according to the food.
. The temperature for frozen food is assumed to be — 18°C to —20°C, for other types of food +5°C to +8°C
(refrigerator temperature).
. To prevent any mistakes during auto sensor cook note that the glass tray and the plate are dry.
. The room temperature should not be more than 35°C and not less than 0°C.
. Do not use auto sensor cook for food with less weight than 100 g. Adjust the time and the power manually.
. If the remaining cooking time is more than one hour, it will be displayed in hours and minutes.
. You can find many hints in the cookbook concerning the auto sensor cooking.
a
ONO
Auto Sensor Reheat (NN-8850/NN-8800)
+ | == Reheat Meal=
va
ePress the Sensor Reheat Pad. ePress the Start Pad.
Note:
For further information see the cookbook.
-14-