YUTAKI CASCADE CONTROLLER
8.6.4 COMMISSIONING
Under the commissioning menu it is possible to adjust the several parameters:
8.6.5 ABOUT
In this section of the LCD controller it is possible to find the following information:
Contact information:
It is possible and
recommendable to fill this
information providing a contact
phone to the user.
143
PMML0510 rev.1 - 10/2019
Screed Drying:
• Circuit 1 setting temperature
• Circuit 2 setting temperature
• Start screed drying
System information:
• Type
• Modules type
• System capacity
• Controller firmware
• Indoor PCB firmware
• Language package