Advertisement
INSTALLATION_STANDARD CONNECTIONS
I, CONNECTION TO A TV WITH A Y/C (S-VIDEO) SOCKET
• Just connect the corresponding connectors with the supplied Y/C
cable.
• As this Y/C cable does not connect the audio, the audio has to
be connected separately.
NOTE
- Please refer to the instructions that came with the TV set for
selection of the correct input.
2. AUDIO CONNECTIONS
• If required, you can connect the player's audio output
(see
10,11 page 9)
to the input of your HiFi system with an
optional audio cable.
CAUTION
DO NOT CONNECT THE PLAYER'S AUDIO OUTPUT
(10,11)
TO THE HDFI PHONO (RECORD PLAYER) INPUT.
3. POWER CONNECTION
• Connect the female end of the supplied AC (alternating current)
THE PLAYER AUTOMATICALLY ADJUSTS TO THE LOCAL
cord into the AC socket
(15)
at the rear.
MAINS VOLTAGE.
• Insert the male end of the cord into an AC outlet.
WHEN THE PLAYER IS IN "STANDBY" OR "OFF" MODE, IT IS
CAUTION
STILL CONSUMING SOME POWER. IF YOU WISH TO
NEVER MAKE OR CHANGE CONNECTIONS WITH THE
DISCONNECT YOUR PLAYER COMPLETELY FROM THE POWER
POWER SWITCHED ON.
SOURCE, WITHDRAW THE PLUG FROM THE AC OUTLET.
ONLY A QUALIFIED SERVICE PERSON SHOULD REMOVE
THE COVER OR ATTEMPT TO SERVICE THIS DEVICE.
USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE OR OTHER UNSAFE CONDITION.
10
Advertisement
