CIDOO ABM084 - Tri-mode RGB Hot swap E-sports Mechanical Keyboard Manual

Toggle Wired/Bluetooth/2.4Ghz mode: FN+TAB

Bluetooth Pairing Instructions

1. Switch on the left side of the keyboard and make sure that the keyboard is under Bluetooth mode.
2. Press and hold FN+Q /W / E,The "Q/W/E" key will begin to flash repeatedly to indicate that the keyboard is ready to connect to a new device over Bluetooth.
3. On the device you wish to connect to, begin to search Bluetooth device and select "CIDOO ABM084" once it appears on the device.
4. Once the keyboard has connected to the device, the "Q/W/E" key will stop flashing to indicate successful Bluetooth pairing.
5. The keyboard can support Bluetooth connections for up to three devices. Press and hold FN+Q/W/E to set up a connection to a new device. Switch previously paired devices by quickly pressing FN + Q/W/E.

2.4Ghz pairing instructions: FN+R

Switch the keyboard to 2.4Ghz mode. Press FN+ R. The wireless indicator will flash white repeatedly. Plug the USB dongle to USB port (Make sure that keyboard is close to USB port), The indicator LED will cease flashing, indicating that pairing was successful.

RGB Backlighting and Animations

Multimedia Keys and Rotary Knob (Only Applies to 84 Keys Layout Keyboard)

The media keys has 2 layer functions.

Mode 1: Previous track, Next track and rotary knob is volume control, short press is mute. Long press rotary knob until backlight flash 3 times will enter Mode 2.

Mode 2: Custom backlight 1, Custom backlight 2, and rotary knob is brightness control, short press is changing backlight mode.

Custom Backlight Mode Instructions

1. Press and hold rotary knob for 5 seconds until keyboard backlight flash 3 times.
2. Each key will store a custom backlight mode, total 2sets of backlight modes can be customized.
3. Press the keys that you wish to set the backlighting for.
4. Press small media key to save and exit the custom backlight mode.

Indicators

1. The first one is Caps lock: LED color is blue when Caps lock is on
2. The second one is wireless devices indicator:

   Wireless Devices indicator	Bluetooth 1#	Bluetooth 2#	Bluetooth 3#	2.4Ghz
   LED color	Red	Green	Blue	White

3. The third one is charging indicator: When keyboard is charging, the LED is red, when keyboard battery is full, the LED is green. FN key will flash white once battery power is low.

Auto Sleep Mode

After 5 minutes without a keypress the backlighting will turn off to conserve battery. After 30 minutes, the keyboard will enter standby mode and disconnect from Bluetooth. Any keypress will reconnect the keyboard.

Multimedia Keys

Multimedia Keys

For software download, please visit website: WWW.CIDOOO.COM