Table of Contents
Advertisement
Before proceeding with any
maintenance or cleaning task, the
cooker hood must be disconnected
from the power supply (see "Warning
and Safety instructions").
Cleaning the casing
Clean all surfaces and control
elements with a sponge cloth and a
solution of warm water and washing-
up liquid.
Remove the grease filters and clean
any grease residues from the
accessible parts of the casing. Doing
so will prevent a fire hazard.
After cleaning, wipe the surfaces dry
using a soft cloth.
Glass surfaces can also be cleaned
with a commercially available glass
cleaner.
Important information on
cleaning the casing
Unsuitable cleaning agents can damage
the surfaces.
Do not use any of the following cleaning
agents:
- Cleaning agents containing soda,
acids, chlorides or solvents
- Abrasive cleaning agents, e.g. powder
cleaners or cream cleaners and
abrasive sponges, as well as pot
scourers or sponges which have been
used previously with abrasive
cleaning agents
Minor scratches on the surface are
inevitable when cleaning coloured parts
of the casing; they may be visible
depending on the lighting in the kitchen.
Cleaning and care
Grease filters
Cleaning interval for grease filters
Clean the grease filters every 3 to
4 weeks at the latest. Accumulated
grease solidifies over a longer period of
time and makes cleaning more difficult.
If you are using Miele@home for the
cooker hood, the Miele app will remind
you to clean the grease filters after 30
operating hours.
Opening the deflector plate
The deflector plate is held in place by
magnets.
Pull the deflector plate out of the
holder at the bottom and swing it
upwards.
27
Advertisement
Table of Contents
