Table of Contents
Advertisement
Troubleshooting
Symptoms related to software, operating system or operations
R A warning dialogue appears when|
@ Were the mouse and other peripheral devices connected after the
the
display
changes
to
the]
power was turned on?
Windows
NT startup screen during]
If this is the case, the power must be turned off, the devices must be
startup.
connected properly and then the system must be re-booted.
@ Was the power turned off and then immediately turned back on?
Wait at least 5 seconds after turning the power off before turning it
back on.
R The application program's icon fails} è Has the system been started up in the VGA mode (640 x 480 screen
to appear
on
the Windows
NT|
resolution) or has the screen resolution setting been changed?
startup screen.
è Has the display size on the personal computer's monitor been
adjusted so that the whole picture fits inside the display range?
The application program's icon may be located outside the screen
display range.
@ Have you deleted the application programs shortcut icon?
If the icon has been deleted in error, check inside the [trash folder],
and bring back the "toolbox32.exe" shortcut icon from it.
B A warning dialogue appears when
@ Is the AV hard disk recognized correctly by Windows NT?
the application program is started.
Start the disk administrator on the Windows NT management menu,
and check the AV hard disk recognition status.
For further details,
refer to item 3-4 "AV disk inspections (2)" in Chapter 3 of the
Installation
Manual
provided
separately.
(Refer to page
18 of
Installation Manual.)
—~24-
Advertisement
Table of Contents
