Specifications Introduction; Timing Parameters; Common Specifications - HP 8112A Operating, Programming And Servicing Manual

Specifications
Introduction

Timing Parameters

Common Specifications

All specifications in the following sections describe the warranted
performance of the instrument:
Timing parameters
n
Output parameters
n
Waveform characteristics
n
All specifications apply with a 50 52 load, after a 30 minute warm-up
period, and are valid for ambient temperature in the range 15OC to
35°C. Refer to the General Characteristics section of this chapter for
the performance derating factor to be used outside this temperature
range (within the specified operating range of 0°C to 55OC) .
All operating characteristics given in the following sections describe
typical performance figures which are non-warranted:
Trigger modes
n
Control modes
n
Output Modes
n
Inputs and Outputs
n
Additional features
n
General characteristics
n
Unless otherwise stated, specifications are quoted for 50% amplitude
in normal mode, fastest transitions.
Resolution
3 digits, best case 100 ps
Accuracy
Repeatability
Factor 4 better than accuracy
Jitter
max 0.2% of programmed value t100 ps
Specifications 2-1