Winbook LM User Manual page 11

LM Chapter 1
Figure 1-3: Rear View of notebook
3.Parallel (LPTI) Port This port is normally used to connect a printer to the Notebook.
4.Reset Button Pressing this button will reboot the system. All unsaved data will be lost.
5.VGA Display Port
This port is used to connect an external monitor (CRT) to the Notebook.
6.Docking Station Connector
This port is for connecting the Notebook to its proprietary Docking Station or I/O Replicator.
7.External Keyboard or PS/2 Mouse Port
This port is for connecting either an external keyboard or a PS/2 mouse.
[LM 1-12]
Right Front View (Panel Open)
Open the Notebook by first sliding the latches located on either side of the Notebook's
cover towards you. Please refer to Figure 1-1 if you are having trouble locating the LCD
panel release latches. Raise the cover to its open position. Figure 1-4 shows the
Notebook in the open position with the external parts labeled. As mentioned earlier, the
cover can be adjusted to an angle of O' to 180'. Adjust the LCD cover to an angle
whereby there is no glare emitting from the screen.
Page 10 of 15