Related Manuals for Samsung Wi-Fi Kit 2.0 MIM-H04AN
Summary of Contents for Samsung Wi-Fi Kit 2.0 MIM-H04AN
- Page 1 Air conditioner User & installation manual Wi-Fi Kit 2.0 MIM-H04AN • Thank you for purchasing this Samsung Product. • Before operating this unit, please read this manual carefully and retain it for future reference.
-
Page 2: Table Of Contents
Downloading the SmartThings app and registering your Samsung account ......18... -
Page 3: Safety Precautions
Safety precautions This installation manual explains how to install a Wi-Fi Kit to an indoor unit of Samsung system air conditioners. Read the installation manual thoroughly before installing the Wi-Fi Kit. (Refer to the appropriate manual for installing product or other optional parts.) WARNING Hazards or unsafe practices that may result in severe personal injury or death. - Page 4 Safety precautions CAUTION • Do not install the product in a place where it is or might be exposed to inflammable gas leakage. - There is risk of fire or explosion. • Do not install the product in a place where it will be exposed to oil or vapor etc. - If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product may get damaged or product may function abnormally.
-
Page 5: Checks Before Installation
Checks before Installation Accessories Wi-Fi Kit Cable ties (2) Cable clamps (3) M4×16 screws (5) User & installation manual U-type terminals (6) • The Wi-Fi Kit must be installed by a certified technician. CAUTION • Before installation, be sure to cut off power. •... -
Page 6: Installing The Wi-Fi Kit
Installing the Wi-Fi Kit Wi-Fi Kit installation • To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are CAUTION potentially interfering elements between them, it may cause problems with the performance of the Wi-Fi Kit that cannot be resolved by customer services. - Page 7 V1 V2 F3 F4 3. Use two or more screws to fix the back cover to the wall. Connect the power cables (V1, V2) and communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable length.
- Page 8 Installing the Wi-Fi Kit Wi-Fi Kit wiring diagram 1) Connecting to a single outdoor unit (F1-F2) R1 R2 <Connection between the Wi-Fi Kit and multiple units> <Connection between the Wi-Fi Kit and a single unit> MIM-N10 (CN4, Blue) (CN3, Red) R1 R2 <Connecting between the Wi-Fi Kit and ERV devices>...
- Page 9 2) Connecting to multiple outdoor units (R1-R2) R1 R2 R1 R2 F1 F2 V1 V2 F1 F2 Touch centralized controller - Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. - Connect the power cables to V1 and V2 of the indoor unit. - Other controllers (e.g.
- Page 10 Installing the Wi-Fi Kit 3) Connecting the Wi-Fi Kit and the ERV together (R1-R2) MIM-N10 R1 R2 R1 R2 V1 V2 F1 F2 Touch centralized controller - Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. - Connect the power cable to V1 and V2 of the indoor unit or ERV.
- Page 11 ※ For indoor units without V1 and V2 connection terminals, use the external control line 2 for SUB PBA (inside the indoor unit) for 12VDC power supply. Connect the BLK line (black) to V2 Connect the ORG line (orange) to V1 R1 R2 V1(ORG) V2(BLK)
-
Page 12: Setting The Indoor Unit Tenants For Each User
Installing the Wi-Fi Kit 6. Activate the Wi-Fi Kit. • When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely. • After the system operates, tracking is performed automatically. 7. Tracking ※ Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the Wi-Fi Kit. - Page 13 • A single Wi-Fi Kit can be connected to 16 indoor units at most. • You can rename each Wi-Fi Kit via a smartphone. However, you cannot change the names for other smart phones connected to the same Wi-Fi NOTE adapter.
-
Page 14: Checking The Wi-Fi Kit
[SEG9: 1 (for RMC address mode), SEG11: RMC1 address setting] • To set the tenant address upon request, contact the Samsung service centre. • To control all indoor units with different tenant addresses, make sure that all the Wi-Fi Kits are registered to the smartphone. -
Page 15: Initializing The User Data
Item LED indication Power supply Wi-Fi connection Wi-Fi setting Tracking completed, AP connection incomplete Wi-Fi modem malfunctioning Blinking Blinking Blinking Searching AP (AP mode) Tracking units Blinking Blinking No unit tracked Blinking Inspection of the network PBA required Blinking Blinking User authentication required Blinking (AP mode) -
Page 16: Updating With A Micro Sd Card
Installing the Wi-Fi Kit Updating with a Micro SD card V1 V2 F3 F4 • Updating with a Micro SD card is only for installer. CAUTION Type Capacity File system ⓓ Micro SD Max 4GB FAT16 ⓒ Micro SDHC Max 32GB FAT32 1. -
Page 17: Smartthings App
SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks. -
Page 18: Downloading The Smartthings App And Registering Your Samsung Account
2. Registering your Samsung account • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. - Page 19 “REGISTER MY ACCOUNT" to independently connect to the product. • If a Samsung account-related country error occurs during connecting to your product, log out of your current Samsung account, log in to your previous Samsung account, and then delete all devices that have been connected previously.
-
Page 20: Starting The System Air Conditioner App
Starting the system air conditioner app Controlling the air conditioner Below are functions that you can control or monitor using the Wi-Fi adapter. Category Function Description Desired Temp Displays the desired temperature. Current Temp Displays the current temperature. Monitoring Filter warning An alert is generated after the filter time elapses. -
Page 21: Troubleshooting
SmartThings app. To add the connected device again, first remove it and then proceed with the process. • If you are using a Samsung smartphone, the server may not be connected temporarily. Turn off and on the power of the Wi-Fi Kit, Adding... - Page 22 Troubleshooting Symptom Measure • The communication error is encountered between the indoor unit and Wi-Fi kit. Check the communication cables (F1/F2). • After installing the Wi-Fi kit, the addresses of the indoor/outdoor units may be changed. If the problem persists after checking the communication cable, keep the following steps: The SmartThings app displays the error number, 628.
-
Page 23: Specifications
(Please use the “Inquiry” menu.) It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM;... -
Page 24: Declaration Of Conformity
English declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. Caution about 5GHz range radio equipment The 5 GHz WLAN function of this equipment may only be operated indoors in all EU countries and in the UK. - Page 25 Memo...
- Page 26 Memo...
- Page 28 DB68-08992A-01...