Step 3: Connecting The Video Cords - Sony RDR-GX7 Operating Instructions Manual

Connect this recorder to your TV monitor, projector, or AV
amplifier (receiver) using a video cur& Select one of the
following patterns t_ through O, according to the input jack on
your TV monitor, projector, or AV amplifier (receiver). This will
enable you to view pictures. Audio connections are explained in
"Step 4: Connecting the Audio Cords" (page 19).
If you are connecting to a VCR
Connect your VCR to the LINE IN (VIDEO)jack on the
recorder (page 29).
O Connecting to a video inputjack
Connect the yellow plug of the audio/video cord (supplied) to the
yellow (video)jacks. You will enjoy standard quality images,
Use the red and white plugs to connect to the audio input jacks
(page 20).
DVD recorder
to LINE OUT (VIDEO) 1 or 2
.!r_ (yello_ (yellow)
Audio/video cord (supplied)\_
_,;_ : Signal flow
TV, projector, or AV
amplifier (receiver)
0 Connecting to component video
input jacks (Y,
PB,
Pc)
Connect the component via lhe COMPONENT VIDEO OUT jacks
using a component video cord (not supplied) or lhree video cords
(not supplied) of the some kind and lenglh. You will enjoy accurate
color reproduction and high quality images. If your TV accepts
progressive (480p) formal signals, you must use _his connection and
_hen press PROGRESSIVE on 1he front panel to accept progressive
video signals. See "O_ing the PROGRESSIVE button" (page 51) for
more information.
DVD recorder
VIDEO OUT
Component video TV, projector, or AV
cord (not supplied) amplifier(receiver)
[EC_,_,_: Signal flow
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To
change the aspect ration, see page 94.
If your TV has a CONTROL Sjack
You can control the recordar by operating the remote toward the
TV. This feature is convenient when you placed the recorder and
the TV away from each other.
After connecting the recorder to other equipment in pattern 0,
O, or O above, connect the CONTROL S IN jack to your TV's
CONTROL S (OUT) jack using a control S cord (not supplied).
Refer to the instructions supplied with the TV to be connected.
(X) Connectingto an SVIDEOinputjack
Connect using an S VIDEO cord (not supplied). You will enjoy
high quality images.
DVD recorder
to LINE OUT (S VIDEO) 1 or 2
S VIDEO cord
DVD recorder
to CONTROL S IN
Control S cord (not supplied) TV
[E_i_ : Signal flow
: Signal flow
TV, projector, or AV
amplifier (receiver)
18
Step 3: Connecting the Video Cords