Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 30HF83 Owner's Manual

Adjusting the picture
Selecting the picture mode
You can select your desired picture type from four picture modes:
Sports, Standard, Movie, and Preference.
Sports
Standard
Movie
Preference
Bright and dynamic picture (factory setting)
Standard picture setting (factory setting)
Movie-like picture setting (factory setting)
Your personal preference*
*(see "Saving your new preferences" on page 43.)
To select the picture mode:
1. Press MENU, and then press _1 (<) or • (>) until the PICTURE
menu appears.
2. Press • (v) or • (^) to select MODE.
3. Press _1 (<) or • (>) to highlight tile mode you prefer.
Note:
ff you select one of _e factory set picture
modes CSPORTS, STANDARDS, or MOVIE)
and then ehange a picture quality setting (for
example, increasethe contrast), the picture
mode automatically changesto
PREFERENCEin the Picture menu.
Tosaveyour new picture quality settings,you
must select SAVE NEW PREFERENCE Csee
page 43) before closing the Picture menu or
the TVwill return to the previouspicture
mode
TV front panel
BREGHTNESS 5O
CO LOR 5_
TENT
SHARPNESS 50
RESET _
SAVE NEW PREFERENCE
.................................................................. i
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint and sharpness.
contrast lower higher
brightness darker lighter
color paler deeper
tint reddish greenish
sharpness softer sharper
To adjust the picture quality:
1. Press MENU, and then press _1 (<) or • (>) until the PICTURE
menu appears.
2. Press • (v) or • (^) until the item you want to adjust is
highlighted.
3. Press _1 (<) or • (>) to adjust tile level.
@@@@@@
MENU [
<>v^
MENU
At,
MODE PREFERENCE
COLOR 5_
TENT
SHARPNESS 50
RESET _ i
SAVE NEW PREFERENCE
The PICTURE qualities you adjtrsted can be saved in the TV's
memory with the SAVE NEW PREFERENCE feature (see page 43).
You can keep these settings or choose factory set options, as described
under "Selecting the picture mode" above.