PLANEPRINT OV10 Bronco Assembling Manual page 3

RC Components
MOTORS 2 pieces, for example: • PLANET-HOBBY JOKER 3542-6,5 V3 800 KV BRUSHLESS MOTOR
PROPELLER 3 blade Prop 10*7 like Master Airscrew, 1 piece clockwise and 1 piece conterclockwise!
or 2 blades 12*7 (is very close to the ground when the gear defl ects!)
CONTROLLERS suitable for your Motors, 2 pieces
OPTION 1: you can either use two controllers
Receiver
Battery
OPTION 2: two BEC controllers
Receiver
Battery
RECEIVER 9 Channel
BATTERY 4S LiPo-Akku, 3500 - 4500 mAh (Ideal weight 300 to 400 grams)
SERVOS 6 pieces max 12 mm
2 Servos max 9 mm
SERVO CABLE cross section 0.25 qmm, twisted cable, 4 meters
(We recommend soldering the cables instead of using plug-in extensions)
Servo cable extension with plugs 50 mm, 2 pieces
MOTOR CABLE cross section1.5 qmm (to extend the distance between controller and motor)
SERVOLESS RETRACTS
OV-10 BRONCO
without BEC
BEC
(5V)
XT60
Y cable
and deactivate the BEC on one of them (Pull the red + cable out of the plug)
XT60
Y cable
thick, for example: • Hitec HS55
thick, for example: • PLANET-HOBBY ECO Plus Picco 8
Two normal and one steerable Nose Wheel, size M
and an external supply for the
NOTE
be twisted to avoid interference.
XT30
Controller
BEC
(5V)
Controller
BEC
(5V)
Controller
BEC
(5V)
Controller
BEC
(5V)
• Savöx SH-0254
• Hitec HS 40 Eco Servo 4,8g
33 mm
servos.
The motor cables should
Motor L Prop right-turning
Motor R Prop counterclockwise
Motor L Prop right-turning
Motor R Prop counterclockwise
Ø 4 mm
PRINTING & ASSEMBLING MANUAL
© PLANEPRINT 3