Advertisement
Mechanical and Dismantling Instructions
Dismantling Instruction
The following guidelines show how to dismantle the player.
Step 6:Dismantle the Loader.Rive off 4 rubber pads on the plastic feet and then remove 16 screws
on the two matel bottom covers.Open the cover on right side.Disconnect connectors(XP7,J11,J12).
Open the cover on middle.(Figure 5)
Step 7:Dismantle the Power board.Remove 4 screws on the board and disconnect connectors(CN501,
CN503).Then pull up the board.(Figure 5)
Step 8:Dismantle the Amplifier board.Remove 4 screws on the board and disconnect connectors(XP8,
XP5,XP6,XP4,XS2).Then pull up the board.(Figure 5)
Step 9:Dismantle the Main board.Remove 3 screws on the board and 3 screws on back panel.Disconnect
connectors(XP9,XP6).Then pull up the board.(Figure 5)
6-3
XP8
XP5
XS2
XP4
XP13
XP9
(Figure 5)
Detailed information please refer to the model set.
CN503
XP6
XP4
XP6
J12
CN501
Advertisement
