Advertisement
DISASSEMBLY INSTRUCTIONS
BACK CABINET REMOVAL
¢1.7 x 6mm
1. Remove one screw @, two screws ®and two screws
©.
Note 1: For the model whose model number is more
than #22001, one screw is added on the ©
section.
So remove the screw also when
removing the back cabinet.
2. Remove the back cabinet from the unit slowly.
Note 2: The mask sheet is pasted on the Osection of
the back cabinet for servicing.
For the unit
with the screw is tightened on the Osection,
remove the mask sheet by using the screw-
driver.
Back Cabinet
Figure 1
DC Jack
© $1.7 x 4mm
Figure 2
Figure 3
FRONT CABINET REMOVAL
1. Remove the back cabinet.
2. Remove two screws ©.
3. Remove the front cabinet from the © or @ section.
Note 3: There are steel balls and springs in the ®and
@section.
Be sure not to miss them.
Front Cabinet
'Doty noise reduction manufactured under
|
Sense fom Dolby Laboratories Licedsing
oxpixation. "OORy" and tea doibie
'Symbol ae trademarks
of Dolby Labocatores
{_ Eeensing Gomporation.
E
Rigure:4
Figure 5
Advertisement
