To Remove The Unit - Kenwood KRC-580 Instruction Manual

To remove the unit.
Screw with washer
Lo (M4 x 8) |
iat = 1. Remove the Screws with washer (M4 x
8) holding on the back panel.
uol1e||e}
Se Removal tool
2. Insert the Removal tool into the slot in
the unit and pull out the unit. The lock
is released and the unit is detached.
Screwdriver
3. Pull out the Removal tool by pressing
down the locking tabs on the top using
a screwdriver.
Locking tab
English 39