Table of Contents
Advertisement
S e t t i n g s
Automatic keyguard
You can set the keypad of your device to lock automatically after a preset time
delay.
1. At the start screen, select
keyguard
>
On
or Off.
2. If you select On, Set delay is displayed.
3. Enter the delay (in minutes and seconds), and select OK.
When keyguard is on, it may be possible to dial the emergency number
programmed into your device.
Touch tones
Touch tones are the tones that sound when you press the keys on your device
keypad. You can use touch tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from
your device keypad, or send them automatically by saving them in your device.
Set type
1. At the start screen, select
Manual Touch
tones.
2. Select one of the following options:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the
length
option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
At the start screen, select
Touch tone length
>
Welcome note
You can write a welcome note which briefly appears on the display screen, if
provided by your service provider, whenever you switch your device on.
58
Menu
>
Settings
Menu
>
Settings
Menu
>
Settings
Short
(0.1 second) or
>
Phone settings
>
Phone settings
>
Phone settings
>
Long
(0.5 second).
>
Automatic
>
Touch tones
>
Touch tone
Touch tones
>
Advertisement
Table of Contents
