Device Management; Control; Matrix Mode; Settings - PTZ Optics PT-SUPERJOY-G1 User Manual

PT-SUPERJOY-G1 - Instructions
Joystick Web Interface

Device Management

The Device Management page, available from the controllers web interface, allows you to define new
cameras
and adjust already configured cameras.
Group 1-4: Camera groups 1 - 4. Each group includes 7 channels / cameras.
Channel: Joystick control address.
Options include: 1 - 7 (IP & Analog)
IP: The IP address of the saved network camera.
Port: The control port of the saved network camera.
Type (Network): The control protocol of the saved network camera.
Baudrate: The baud rate of the saved analog camera.
Address: The camera control address of the saved analog camera.
Type (Analog): The control protocol of the saved analog camera.
Operate: Click "modify" to edit the settings of the saved camera. Use "snap" to take a snapshot of the
camera's current view. "Home" will allow you to send the camera to the home position.
For more information on editing already configured cameras from the Device Management interface,
check out the Adding a Camera > From the Web Interface section.

Control

The Control page, available from the controllers web interface, allows you to call presets of the connected
cameras. This page acts similarly to Basic Mode without Joystick .

Matrix Mode

The Matrix Mode page, available from the controllers web interface, allows you to call presets 1-3 of
cameras
1-3. This page acts similarly to Matrix Mode .
20
Rev 1.3 3/21

Settings

The Settings interface allows you to adjust the configuration settings of the joystick.
Network: Allows configuration of the joystick's network configuration (DHCP / Static IP).
Options include: DHCP or Static IP Address, Subnet Mask, Gateway, DNS1, & DNS2.
Upgrade: Upgrade the joystick's firmware to the latest version.
Factory Restore: Restores the joystick to factory default settings.
Restart: Restart the joystick.
Import: Import joystick settings from PC.
Export: Export joystick settings to PC.
User: Add or edit admin and guest login credentials.
System Settings: Invert Pan and/or Tilt
Version: Displays the Hardware, Software, and Web firmware versions on the
This version was edited February 23, 2023
Page 6