Advertisement
COMMERCIAL DRYER SPECIFICATIONS
SINGLE DRYER SPECIFICATIONS
MODEL NUMBER
GENERAL INFORMATION
Stainless steel look Push Button console, white
enamel drum, powdered paint finish cabinet and
top, removable lint filter, improved meter case.
ELECTRICAL REQUIREMENTS
MOTOR
HEATER TYPE
HEATER/BURNER RATING
(Add 500 watts approx for motor on all
dryer models)
OPERATIONAL AMPERAGE
(Does not include control or gas valve)
DIMENSIONS
See Illustrations
SHIPPING WEIGHT (EST.)
DRUM VOLUME
*(height at meter case top) **Burner orifices are available for manufactured, natural, mixed, and LP gas with varying BTU ratings.
††
Power cords on electric models sold separately Energy information is available online at www.coinop.com/products. WP lit# CWXL077
Dimensions are for planning purposes only. For complete information,
see installation instructions packed with product.
4.75"
(12.1 cm)
18.385
(46.7 cm)
8
To locate a distributor near you, please visit www.coinop.com/distributor, or call 1–800–NO–BELTS.
Metercase Model Factory Installed
Coin Slide and Coin Box,
$1.00 Factory Preset
3-Wire Nominal 240/208V, 60 Hz., A.C.
Standard 30-amp Breaker/Fuse Branch
Circuit per Dryer (subject to local codes)
1
⁄
HP Single Speed Motor with Built-In
3
Overload Protector 5.9-amps Max Rating
Heater Rated at 5600 Watts
Heater—23.33-amps@240V 27.33 Total
42.875"H*, 29"W, 27.75"D
27.75" (70.5 cm)
25.50" (64.8 cm)
.75"
27.25"
(12.1 cm)
(69.2 cm)
1.25"
(3.2 cm)
††
CEM2940TQ
$0–2 per Cycle,
ELECTRIC
Motor —4.0-amps
No load
147 Lbs.
7.0 Cu. Ft.
7.87"
(20 cm)
2.2"
(5.6 cm)
†
CGM2941TQ
Metercase Model Factory Installed
Coin Slide and Coin Box,
$1.00 Factory Preset
$0–2 per Cycle,
Nominal, 120V, 60Hz., A.C., Standard 15-amp
Breaker/Fuse Branch Circuit per
Dryer (subject to local codes)
1
⁄
HP Single Speed Motor with Built-In
3
Overload Protector 5.9-amps Max Rating
**
GAS
22,000 BTUh
Natural Gas
Motor —4.0-amps
No load
42.875"H*, 29"W, 27.75"D
147 Lbs.
7.0 Cu. Ft.
†
LP Conversion Kit: 49572
Exhaust Information
All dryers require the equivalent of a 4-inch
diameter exhaust duct. Rigid metal duct is
recommended. Failure to properly exhaust
the dryer will result in improper operation.
# of 90°
4" Hood
Turns
Maximum Length of 4" Diameter Rigid metal Duct
0
64 Ft.
1
54 Ft.
2
44 Ft.
3
35 Ft.
4
27 Ft.
Maximum Length of 4" Diameter Rigid metal Duct
0
36 Ft.
1
31 Ft.
2
27 Ft.
3
25 Ft.
4
23 Ft.
1
2
⁄
" Hood
2
58 Ft.
48 Ft.
38 Ft.
29 Ft.
21 Ft.
28 Ft.
23 Ft.
19 Ft.
17 Ft.
15 Ft.
Advertisement
