Am/Fm Mode (Some Versions Only) - Kenwood TM-733A Instruction Manual

34
Press [F]+[C.IN].
+ "L" appears. The default is the currently
selected frequency.
Turn the Tuning control, or press microphone
[UP]/[DWN], to display the desired lower limit.
Press [MR] to store the lower limit.
+ "U" appears. The default is the currently
selected frequency.
Turn the Tuning control, or press microphone
[UP]/[DWN], to display the desired upper limit.
/ = ~
P CODE
TY AIIS
SHIFT TONE CALL LOW
7 Press [MR] to store the upper limit.
+ The previous mode is restored.
Note: The lower limit must be lower in frequency than the upper
limit. The minimum programmable range is 1 MHz, and
selections must be made within 10 seconds or the previous mode
is restored.
AM/FM MODE
(SOME VERSIONS ONLY)
Some versions of the transceiver are able to receive
AM and FM modes. The AM mode is selected
automatically when any frequency in the range 118.000
to 135.995 MHz (AIR band) is chosen. Outside this
range, the default is FM. However, either mode can be
selected manually on any VHF frequency. Crossing the
136.000 MHz boundary restores the default modes.
1 Press the VHF [BAND SEL].
+ The VHF [BAND SEL] is the left Band Selector
button.
2 Press [MHz] (1s) to toggle between the AM or FM
mode.
CALL LOW SHIFT