Selecting Frequency - Kenwood TH-28A Instruction Manual

2 Selecting Frequency
1
You have several ways to select frequencies:
m@ By entering a specific frequency via the keyboard
m By using the tuning control
m@ By selecting a memory channel (see page 20)
@ By pressing the CALL key
Direct Keyboard Frequency Entry
You can enter specific frequencies directly into the
transceiver.
We will explain how to enter 145.050 MHz using the
TH-28A/E as an example.
If the transceiver is in the Memory mode or CALL
mode, press the VFO key to select the VFO mode.
2 Press the numeric 4 key. A 4 is entered as the
10MHz digit, and the 1MHz and below digits change
to-—.
ff crore
APO
3 Press numeric keys 5, 0, 5 and 0.
IC
(tf.
APO
Next press numeric keys 0 and 5.
How Step Selection Works
0 00 5
"1