Panasonic ES208 Operating Instructions Manual page 7

Maintenance
Cleaning
Press the foil frame release button
to remove the outer foil frame (see
fig 2) Turn the shaver on and rinse
the inner blade under running water
or in a basin (see fig 3)
DO NOT USE BOILING or extreme-
ly hot WATER
Next, switch the shaver off, close
the fort frame and dry it gently After
the shaving head ts dry, replace the
protective cap
Replacing shaving head
components
If you Use the shaver twice a week,
the outer foil may need to be
replaced every 1 year and the inner
blade every 2 years
Replacing the outer foil
To remove the outer foil frame,
press the foil frame release buttons
(see fig 2)
Then, Squeeze the front and the
back stde of the foil frame and lift up
the two knobs on the outer foil (see
tig 4)
Inserting the new outer foil
Slip the foil into the frame and guide
the plastic edges onto the hooks in
the foil frame until tt clicks into
place
Replacing the inner blade (see fig
5
Remove the inner blade by grasping
it firmly at both ends and pulling tt
straight away from the shaver
Inserting the inner blade
Hold the inner blade at both ends
and guide it onto the inner blade
mount
Press it firmly into the mount until it
Snaps in place
ATTENTION.
The product that you have pur-
chased contains a rechargeable bat-
tery The battery Is recyclable At
the end of tts useful life, under varı-
ous state and local laws, it may be
illegal to dispose of this battery into
the municipal waste stream Check
with your local solid waste officials
for details In your area tor recycling
options or proper disposal
E
How to remove the
built-in rechargeable
battery before disposal of
shaver
The battery in this Shaver is not
intended to be replaced The proce-
dure described below is intended
only for removal of the battery for
the purpose of proper disposa!
Discard shaver after the battery has
been removed
WARNING Do not attempt to
replace the battery for the purpose
of reusing the shaver This could
result In the risk of fire or electric
shock
1 Remove the protective cap, outer
fotl frame
2 Remove the inner blade and four
screws on the top (a) (see fig 8)