Changing The Volume Of The Alarms And Buzzers; Adjusting The Display Brightness; Switching Off Demo Mode - Miele FNS 4782 E edt/cs Operating Instructions Manual

Changing the volume of the alarms
and buzzers  / 
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message).
Alternatively, you can switch the alarms
and buzzers off if you find them
annoying.
 In Settings mode , use the  or
 sensor to scroll to the  symbol.
 Touch OK.
 Use the  and  sensors to select
the volume you want for alarms and
buzzers.
 Touch OK.
When the alarms and buzzers are
switched off,  will appear.
Adjusting the display brightness 
You can adjust the display brightness to
the lighting conditions in the room.
 In Settings mode , use the  or
 sensor to scroll to the  symbol.
 Touch OK.
 Use the  and  sensors to select
the display brightness you want.
 Touch OK.
Selecting further settings
Switching off Demo mode 
Demo mode  allows the refrigeration
appliance to be presented in the
showroom without the cooling system
being switched on. Do not activate this
setting for domestic use.
If Demo mode has been switched on
as a default setting,  will appear in
the display when the refrigeration
appliance is switched on.
 Touch the OK sensor on the control
panel.
Miele will appear initially in the display,
followed by the start screen.
 Touch OK.
 In Settings mode , use the  or
 sensor to scroll to the  symbol.
 Touch OK.
After Demo mode  has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
47