Playing Music - Kenwood KR-897 Instruction Manual

|
6db_
.m
KR,897/KR-797 [En}
_: Keys or ¢ont f ols to be used in this operation
a Turn the power ON.
POWER •
O
ol
Select the SPEAKERS key setting.
O _O_--'-- TheSPEAKERS indicatorshould light
up.
STANDBY
O
_l Select the input source.
tNPUT SELECTOR
_l Play the selected source.
_'_ Adjust the volume.
VOLUME CONTROL
Tv_°ldmeC_ea se .vT_l_rmC_ ease
When the SPEAKERS indicator is ON:
The speakers connected to the SPEAKERS terminals on the rear
panel output sound•
When the SPEAKERS indicator is OFF:
The speakers do not output sound. Use this setting when listening
through headphones.
• For the operation when tlle power amplifier (KM-897) is connected to
th_ KR-897, see -_ and refer to the instruction manual of the
KM-897.
The input sources are switched in the following order:
I ,F_TUNER (frequency display) Theselectedsource is
,@_ P HONO displayed,
,_TAPE1 (MD or VIDE01)* 1
®CO
1
_VIDE02 ', I-- TI
L .U
,1: Switching the TAPE1 display to MD or VIDEO1 display
When a KENWOOD MD recorder is connected in the [SL 161system
control mode, the TAPE 1 input should be switched to the MD input
using the following _rocedure.
OSelect TAPE1 with the INPUT SELECTOR. [_
_Press and hold the AUTO key for more than 2
seconds to select MD.
f 1
_TAPE1 _ _MD "-_ _VIDE01
Volume level is displayed_
UL U _')_
eThe time taken till the volume level is displayed is variable depending
on the current operating condition,
eRotatln9 the VOLUME CONTROL at a higher speed increases the
amount of volume change (AI VOLUME function),
eThe sound of input source cannot be listened to while TAPE 2
MONITOR is ON