NuWave BRAVO XL PRO Owner's Manual page 11

MENU TEMP
PREHEAT
1. Set your desired cooking
PREHEAT
PROBE
temperature and time.
2. Press PREHEAT to enable
PRESET WARM
the Preheat function. Then
press START/PAUSE to begin
LIGHT FAN preheating. "Preheat" will scroll
on the display.
3. Once the Bravo XL Pro reaches
the set temperature, it will beep
and scroll "READY" on the
display.
4. Press START/PAUSE to pause
then add food to the oven. Press
START/PAUSE to begin cooking.
If you do not press START/
PAUSE after 10 seconds the unit
F
C Sec
will beep once and begin cooking
% %
automatically.
Target Pre Time Current Sear
Rack
Proof
Level
NOTE:
Air Fry
Reheat
• Press PREHEAT at any point to
Cookie
cancel the preheat process.
Slow Cook
Dehydrate
• Some Presets will automatically
preheat.
• The Bravo XL Pro can be set
to preheat automatically by
pressing and holding PREHAT
until you hear 2 beeps. Repeat to
disable.
TEMP TIME
PROBE
The digital temperature probe can be
PROBE SEAR
inserted into your food to measure its
internal temperature as it cooks.
WARM
TOP/BOTTOM
1. Plug the probe into the jack on
the control panel, then insert the
FAN ON/OFF
other end into the thickest part of
the food. PROBE will be shown
on the display and the current
and target temperatures will be
shown.
2. Set your desired cooking
function. Press PROBE. The
default target temperature of
165°F will be shown. Turn the
START/PAUSE dial to set the
*
When searing at temperatures above 455°F and above only the top heater will work.
OPERATING BUTTONS FUNCTIONS
TIME
SEAR
TOP/BOTTOM
ON/OFF
Temp Target
Toast
Broil
Bake
Roast
Grill
Pizza
MENU
PREHEAT
PRESET
LIGHT
F
Target Current
3.
NOTE:
•
F
Sec
C
•
% %
Pre Time Current Sear
Rack
Proof
Level
Air Fry
•
Reheat
Cookie
Slow Cook
Dehydrate
•
•
TEMP TIME
SEAR
The Bravo XL Pro can sear food at high
PROBE SEAR
heat. The default is 500°F for 5 minutes.
F
C
1.
%
WARM TOP/BOTTOM
Temp Target Pre
Toast Proof
Broil Air Fry
FAN ON/OFF
Bake Reheat
2.
Roast Cookie
Grill Slow Cook
Pizza Dehydrate
3.
4.
NOTE:
•
MENU
PREHEAT
PROBE
PRESET
The Bravo XL Pro has 100 pre-
PRESET WARM
programmed recipes which can be found in
the Quick Start Guide and Recipe Book.
LIGHT
target temperature between 50°F
and 212°F. Press START/PAUSE to
begin cooking.
When the probe's measured
temperature reaches the target
temperature, the Bravo XL Pro will
stop cooking.
Ensure the probe does not touch
any bones when inserted.
Press Probe at any time to adjust
the target temperature by turning
the START/PAUSE dial.
The Bravo XL Pro will emit 3 sets
of double beeps when the probe
temperature is within 10°F of the
target temperature.
If the set cooking time has ended
and the target temperature has not
been reached, the Bravo XL Pro will
continue to cook until reached.
If not already displayed, press
PROBE to display the Probe
temperature.
Sec
Press SEAR and make any
%
Time Current Sear
adjustments to the default cooking
Rack
Level
temperature and time.
Press START/PAUSE to begin
cooking.
The temperature and time can be
adjusted at any point during the
searing process.
Press and hold SEAR to begin
searing at the default settings, or
adjust as needed.
When the Bravo XL Pro is searing,
TEMP TIME
SEAR will be shown on the display
and (:) will flash.
SEAR
TOP/BOTTOM
FAN ON/OFF
nuwavenow.com | 11
*