Controlling The Bulb - Stitch 44540 User Manual

Controlling the Bulb

Use the various controls in the app to select
light, change Color, set up a Scene, or set a Timer.
The instructions in this manual are a guide to the app
as of this writing, but the app is updated from time
to time and the procedures may change. If they
differ, always defer to the instructions in the app
over any instructions in this manual.
Easy Mode Configuration
Note that the bulb can pulse rapidly or slowly, depending on which Mode is active.
Rapid pulsing indicates Easy Mode and slow pulsing indicates AP Mode. To switch
modes, quickly turn the bulb on/off three times.
1. Disconnect the lamp from its AC power outlet.
2. Screw the STITCH™ Smart Wi-Fi® RGB Light Bulb into the lamp's E26 socket.
3. Plug the lamp into an AC power outlet, then turn on the lamp's switch. You
should see the bulb's white light pulsing rapidly a few times, this means it is in
pairing mode. If it is not pulsing rapidly (i.e., it is solid or pulsing slowly), turn the
lamp on/off quickly three times and then leave it on the fourth time. This should
reset it and the light should start pulsing rapidly.
4. Open the STITCH™ by Monoprice™ app, then tap the
of the screen. Choose the Others options, then select Smart Bulb.
5. Confirm you saw the bulb pulse rapidly a few times by tapping Confirm
indicator rapidly blinking.
White
7
in the top right corner