CONNECTING
EXTERNAL VIDEO SOURCES
CONNECTING
A STEREO LASERDISC/DVD
PLAYER OR HDTV SET TOP BOX TO INPUT 1 OR 2 COMPONENT:
Y*PBPR .
1.
Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the
AVC Center below.
2.
Connect the cable from the CB/P B OUT or B-Y OUT of the Laserdisc/DVD
player or HDTV set top box to the INPUT (PB) jack.
3.
Connect the cable from the CR/P R OUT or R-Y OUT of the Laserdisc/DVD
player or HDTV set top box to the INPUT (PR) jack.
4.
Connect the cable from the AUDIO OUT R of the Laserdisc/DVD
player or HDTV set top box to the INPUT (AUDIO/R) jack.
5.
Connect the cable from the AUDIO OUT L of the Laserdisc/DVD
player or HDTV set top box to the INPUT (AUDIO/L) jack.
6.
Press the VIDI/VID2
button, to view the program from the Laserdisc/DVD
player or HDTV set top box. The VIDEO label
disappears automatically
after approximately
four seconds.
7.
Press the ANT button to return to the previous channel.
I, ====
DVD Player
OUTPUT
R
Y
PS
@@@
4-
HDTV Set-Top
Box
Rear Panel of AVC Center
AU
I,[ i_0
A13,
_U 0 ;
AU_)_9
[
r
r
A3
NOTE:
1. Completely insert the connection cord plugs when connecting to rear panel jacks,
The picture and sound that is
played back will be abnormal if the connection is loose,
2. See page 23 for tips on REAR PANEL CONNECTIONS.
17