9.2.6.3
Digital output (2.6.3)
Digital output 1 (2.6.3.1)
Sets the current usage of digital output 1.
Setting
Digital output 2 (2.6.3.2) to Digital output 4 (2.6.3.4)
Note
Parameters for "Digital output 2" to "Digital output 4"
Parameters for "Digital output 2" to "Digital output 4" are the same as those listed previously (for
"Digital output 1": 2.6.3.1).
9.2.7
Date and time (2.7)
9.2.7.1
Current date and time (2.7.1)
Displays the current date and time.
9.2.7.2
Set date and time (2.7.2)
Sets the current date in the format YYYY-MM-DD and the time in 24-hour format.
For information on how to use the string editor, see Edit view/Read only view (Page 90).
SITRANS TDL
Operating Instructions, 05/2023, A5E51429088_AA
•
Off
•
On
•
Device status
•
Transmission status
•
Limit 1
•
Limit 2
•
Limit 3
•
Limit 4
•
Limit 5
•
Limit 6
•
Limit 7
•
Limit 8
•
Limit 9
•
Limit 10
Parameter assignment
9.2 Setup (2)
121