Optional Accessories and Replacement Parts
The following optional accessories and replacement parts are available. Please
purchase these products as and when needed.
The following list of optional accessories and replacement parts is current as of:
April 2023.
Details of accessories are subject to change without notice and availability may
vary depending on the country of purchase.
Related Links
g
• "Screens"
p.262
• "Mounts"
p.262
• "External Devices"
p.262
• "Replacement Parts"
p.262
• "For Wireless Connection"
p.262
• "Compatible Accessories from Other Projectors"
Screens
Ultra Short Throw Screen ELPSC35 (100")
Ultra Short Throw Screen ELPSC36 (120")
Screens to be installed on a wall. (Aspect ratio 16:9)
Mounts
Setting plate ELPMB75
Use when installing the projector on a wall.
Ceiling mount ELPMB22
Ceiling mount (Low profile) ELPMB30
Use when installing the projector on a ceiling.
Safety Wire Set ELPWR01
Use when connecting the projector to the installation mount to prevent the
projector from falling down.
External Devices
p.263
Replacement Parts
For Wireless Connection
Ceiling pipe (450 mm) ELPFP13
Ceiling pipe (700 mm) ELPFP14
Use when installing the projector on a high ceiling.
Special expertise is required to suspend the projector from a ceiling.
Contact Epson for help.
Document Camera ELPDC30
Document Camera ELPDC21
Document Camera ELPDC13
Document Camera ELPDC07
Use when displaying image such as books or printed materials.
Connection and Control Box ELPCB03
When the projector is mounted on a wall or suspended from a ceiling,
install the remote control to operate the projector at hand.
Air filter ELPAF64
Use as a replacement for used air filters.
Wireless LAN module ELPAP11
Use this to project images from a computer via a wireless communication.
262