Table of Contents
Advertisement
RECORDING WITH A VIDEO
CAMERA
Refer to the instruction manual of the camera as well as
these instructions.
You will need a video camera and power supply for the
video camera.
To pause (Gray)
To video input (BLACK)
To audio input (RED)
1
Connect the camera, power supply unit and VTR as
You can also select "AU" by inputting channel 91
shown in the above diagram.
See each instruction
with remote control unit.
manual for details.
o1
Adjust aperture, focus, etc. on camera.
2
Turn
on
the
OPERATE
switches
of
the
VTR
and
Oeenere
6
Select
tape
speed.
REC
power supply unit.
=
SPEED
3
Insert a cassette.
7
Press the RECORD button to start recording.
The Record Start/Stop button on the video camera
can be used to stop recording between scenes.
OFF
ON
:
8
To stop recording, press the
STOP button.
4
Press the CHANNEL
select button so as to have
"AU" indication light up on the display.
0
STOP
Oo
———
CHANNEL
Note:
The remote control button on a Hitachi Video
Camera can be used to start and stop the video deck.
It has priority over the PAUSE
button of the video
deck.
When the remote control button on the camera
is set to PAUSE,
recording will not start when the
PAUSE button of the video deck is pressed.
The camera remote contro! button must be released in
this case.
Advertisement
Table of Contents
