Epson YM24A Instruction Manual

Instruction of Watch Movement
Cal. YM24A
 Display
Small second hand
 Crown and button operation
Crown Free
Button A Free (No effect)
[*1] Alarm hand position adjustment
If the alarm hands are not adjusted to the current time, follow the procedures below to set them.
(1) Pull the crown out to the 2nd click position.
- If the alarm has been set and the crown is pulled out to the 2nd click position, the alarm hands will turn to indicate the current time.
(2) Press the button A repeatedly to set the alarm hands to the time the main time hands indicate.
- The alarm hands move quickly if the button A is kept pressed.
(3) Push the crown back to the normal position.
 How to set time
(1) Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
- If the alarm has been set and the crown is pulled out to the 2nd click position, the alarm hands will turn to indicate the
current time.
(2) Turn the crown to set the hour and minute hands.
Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
- The hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to set the
alarm hands.
- When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.
(3) Push the crown back to the normal position.
Hour hand
Alarm hour hand
N : normal
WORLD TIME & ALARM
- Alarm
Minute hand
N → 1 → 2
Button A
Alarm minute hand
Crown position
1 : 1st click
Turn clockwise for date
change
Alarm time setting
(at 6H small circle)
Crown
Date
2 : 2nd click
Time setting
[*1]