Management Ports; Console Port; Out-Of-Band Management (Oobm) Port - HP Aruba Networking 9300-32D Installation And Getting Started Manual

<count> of
Split 'ends'
2
4
4
The 400G to 400G products do not need the

Management Ports

The following section provides information about the Console Port, Out-of-band Management (OOBM)
Port, and the USB-A Aux port.

Console Port

Aruba 9300-32D switches include an RJ-45 serial console port on the front of the switch. This port is used to
connect a console to the switch by using an RJ-45 serial cable (not supplied). A DB9-to-RJ-45 console cable
can be ordered from HPE: JL448A, Aruba X2C2 RJ45 to DB9 Console Cable or R9G48A Aruba USB-A to RJ45
PC-to-Switch Cable; R9J32A Aruba USB-A to USB-C PC-to-Switch Cable ; R9J33A Aruba USB-C to USB-C PC-
to-Switch Cable.
The 9300-32D switches also include a micro-USB port on the front of the switch. This port can be used to
connect a console to the switch by using a standard micro-USB cable (not supplied). The micro-USB has
precedence for input. If both cables are plugged in, the console output is echoed to both the RJ-45 and the
micro-USB ports, but the input is only accepted from the micro-USB port.
Use of the micro-USB port may require the installation of a standard USB driver. New Windows installs
n
include the driver by default.
USB driver available from Aruba:
n
https://support.arubanetworks.com/ToolsResources/tabid/76/DMXModule/514/Default.aspx?EntryId=7512
For more information on the console connection, see
console can be a PC or workstation running a VT-100 terminal emulator, or a VT-100 terminal.
The Aruba CX mobile app and the Aruba USB-A Bluetooth adapter (separately orderable SKU# S1H23A)
enable you to configure your switch from your mobile device. For information about using the Aruba CX
mobile app to configure the switch, see the Fundamentals Guide for your switch and software release.

Out-of-band Management (OOBM) Port

This RJ-45 port is used to connect a dedicated management network to the switch. To use it, connect an RJ-
45 network cable to the management port to manage the switch through Telnet from a remote PC or a
UNIX workstation.
HPE Aruba Networking 9300-32D Switch Series | Installation and Getting Started Guide
Example product (see datasheet for more)
<speed> of
the 'ends'
"*" are the solution on the far end of the link
100G
R9B58A 200G QDD to 2xQSFP28 100G 7m AOC
25G
(845420-B21)HPE QSFP28 to 4x25G SFP28 7m AOC (HPE Server product)
JL309A Aruba 100G QSFP28 MPO SR4 MMF XCVR
* JL309A Aruba 100G QSFP28 MPO SR4 100m MMF XCVR
10G
(845420-B21) HPE QSFP28 to 4x25G SFP28 7m AOC {HPE Server product}
* connect to ports that are 10G SFP capable
JH233A HPE X142 40G QSFP+ MPO eSR4 300M XCVR
* J9150D Aruba 10G SFP+ LC SR 300m MMF XCVR
command.
"split"
Setup for Initial Configuration on page 32. The
8