Sealey SA341 Instructions

Original Date: 090500
Issue Date: 090500
Version No: 0
Date Modified: N/A
Item Part No Description Item
24
1 SA341/01 REAR BARREL
25
2 SA341/02 NUT
26
3 SA341/03 WASHER
27
4 SA341/04 LEATHER CUP
28
5 SA341/05 PLATE
29
6 SA341/06 RIVET
30
7 SA341/07 RIVET
31
8 SA341/08 SHIFTING SPRING
32
9 SA341/09 RETAINING RING
33
10 SA341/10 DIRECTION PLATE
34
11 SA341/11 LOCK SPRING
35
12 SA341/12 PIN
36
13 SA341/13 PIN BOX
37
14 SA341/14 PUSH ROD
38
15 SA341/15 VALVE BUSH
39
16 SA341/16 DIRECTION VALVE
40
17 SA341/17 DEAD PLATE
41
18 SA341/18 SCREW
19 SA341/19 BALL VALVE
20 SA341/20 LOCK RING
21 SA341/21 UPPER COVER
22 SA341/22 SCREW
23 SA341/23 HANDLE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date. proof of which will be required for any claim. INFORMATION: Call us for a copy of our latest catalogue
and promotions on 01284 757525 and leave your full name and address including your postcode.
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
01284 757500
Part No Description
SA341/24 O-RING (P8)
SA341/25 VALVE RING
SA341/26 VALVE
SA341/27 VALVE BUSHING
SA341/28 NUT (ROUND)
SA341/29 LOCK SPRING
SA341/30 AIR TRIGGER
SA341/31 AXIS
SA341/32 PIN
SA341/33 DRIVE SHAFT
SA341/34 FRONT BARREL
SA341/35 NUT (HEX)
SA341/36 TOOL CHUCK
SA341/37 SOCK. CAP SCREW
SA341/38 CHUCK GUARD
SA341/39 SPRING WASHER
SA341/40 SCREW
SA341/41 4M/M HEX. WRENCH
SA341/B14 BLADE 14TPI X 4
SA341/18 BLADE 18TPI X 4
SA341/24 BLADE 24TPI X 4
SA341/32 BLADE 32TPI X 4
01284 703534
E-mail: sales@sealey.co.uk
INSTRUCTIONS FOR
AIR OPERATED SAW
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
p WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are
adhered to when using this equipment.
p WARNING! Disconnect from air supply before changing accessories or servicing.
3 Maintain the saw in good condition (use an authorised service agent).
3 Replace or repair damaged parts. Use genuine parts only. Non-authorised parts may be dangerous
and will invalidate the warranty.
3 Use in suitable clean and tidy working area, free from unrelated materials and ensure there is adequate lighting.
3 Before each use check saw blade for condition. If worn or damaged replace immediately.
3 Ensure the correct saw type and size is used.
3 Ensure there are no flammable or combustible materials near the work area.
p WARNING! Always wear approved eye or face protection when operating the saw.
3 Depending on the task, saw noise level may exceed 85dB in which case wear safety ear defenders.
3 Remove ill fitting clothing. Remove ties, watches, rings, other loose jewellery, and contain and/or tie back long hair.
3 Wear appropriate protective clothing and keep hands and body clear of saw blades.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3 Keep children and unauthorised persons away from the working area.
3 Check moving parts alignment on a regular basis.
3 Ensure workpiece is secure before operating the saw. Never hold a workpiece by hand.
3 Check workpiece to ensure there are no hidden features that could damage or snag the saw blade.
3 Check work piece for hidden wires or other items that require protection from the saw blade.
3 Avoid unintentional starting.
p WARNING! Ensure correct air pressure is maintained and not exceeded. Recommended 70-90psi
3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and
ensure that all connections are secure.
3 Prolonged exposure to vibration from this saw poses a health risk. It is the operator’s responsibility to
correctly assess the potential hazard and issue guidelines for safe periods of use and offer suitable
protective equipment.
7 DO NOT use the saw for a task it is not designed to perform.
7 DO NOT operate saw if any parts are damaged or missing as this may cause failure and/or personal injury.
p WARNING! DO NOT saw any materials containing asbestos.
7 DO NOT carry the saw by the hose, or yank the hose from the air supply.
7 DO NOT force, or apply heavy pressure to the saw, let the saw do the work.
7 DO NOT place saw blades close to your face and do not point at other persons or animals.
7 DO NOT operate saw when you are tired, under the influence of alcohol, drugs or intoxicating medication.
7 DO NOT use saw where there is flammable liquids, solids or gases such as paint solvents and
including waste wiping or cleaning rags etc.
7 DO NOT carry the saw with your hand on the power lever.
7 DO NOT direct air from the air hose at yourself or others.
3 When not in use disconnect from air supply and store in a safe, dry, childproof location.
SA341
Model:
SA341 - 0016 - (1) -090500