Advertisement
STEP 3: Insert
2 Phillips
head screws
1/4"x3/8"
from outside
of grill bowl through
Lighting
Tube bracket
and secure
tightly
with
2 1/4" Nuts.
6. Set ALL Control Knobs to OFF. For LP Models,
open gas tank valve slowly until 1/4 to 1/2 open.
7. Light a match and place it over the top opening of
the Lighting Tube. Turn the farthest Left Control
Knob to the HIGH setting to release gas. The
Burner should light immediately.
STEP 5: Turn Control
Knob to "OFF"
STEP 4 :
Follow
below Lighting
Instruction
procedures
to
check Lighting
Tube function
and light your grill.
1. Familiarize
yourself with the safety guidelines
in
the Grill manual. Do not smoke while lighting grill
or checking gas supply connections.
2.
If you have a LP gas grill be sure the LP gas tank
is filled, or if you have a NG grill be sure that the
locking shut off valve is open.
3. Open the Grill Lid.
4. Check that the end of the Burner Tube is propedy
located under the far left burner top.
5. Be sure all gas connections are securely tightened.
STEP 6: Replace
flame tamers, cooking
grids and
secondary
cooking
rack.
WARNING
Failure
to open
Grill
Lid during
the
lighting
procedures
could
result
in a fire
or explosion
that could
cause
serious
bodily
injury,
death,
or property
damage,
15
Advertisement
