Subscribe to Our Youtube Channel
Related Manuals for EVERUN ER2500
Summary of Contents for EVERUN ER2500
- Page 1 Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL EVERUN ER2500 TELESCOPIC WHEEL LOADER OPERATORS’ MANUAL Qingdao Everun Machinery Co., Ltd Add: Room 802, No.30 Building, Huguangshanse Park, Tonglesan Road, Qingdao, China...
-
Page 2: Table Of Contents
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL INDEX 2.5.2 DIMENSION............... 15 目录 FOREWORD................1 SECTION 3................16 SECTION 1................2 Safe operating instructions and precaution.......2 3.1 COMMANDS AND CONTROLS......16 1.1 FOREWORD..............2 3.1.1 STEERING WHEEL..........17 1.2 SAFETY NORMS............3 3.1.2 COMBINED INSTRUMENT.........17 1.2.1 SAFETY RULES............3 3.1.3 Combination switch..........17... - Page 3 Telescopic boom Machine ER2500- THE OPERATOR’S 4.1 GENERAL INSTRUCTIONS........23 MANUAL 4.2 ENGINE..............23 4.3 AIR FILTER............... 23 4.4 COOLING CIRCUIT..........24 4.5 TYRES................ 24 4.6 HYDRAULIC CIRCUIT..........24 4.7 ELECTRIC CIRCUIT..........25 4.8 LUBRICATION............26 4.9 THE PRESSURE MEASUREMENT..... 27 4.10 SUMMARY TABLE MAINTENANCE....28 SECTION 5................29...
-
Page 4: Foreword
Thank you for choosing “EVERUN” brand telescopic multi-function machine. In order to correctly operate and maintain the machine, we hereby make this manual. This manual was made by “Qingdao Everun Machinery Co., Ltd” (later also called manufacture). This manual is coincide with ER series multi-function machine. -
Page 5: Section 1
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL SECTION 1 Safe operating instructions and precaution FOREWORD Read carefully this manual, specially the parts involved with safety rules must be read with extreme care. The buyer will train the workman to correctly use and periodically maintain the machine. -
Page 6: Safety Norms
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL SAFETY NORMS SAFETY RULES 1.2.1 1. The machine must be operated by qualified or authorized person. It is absolutely forbidden to have the machine operated by inexperienced person in bad psychological conditions. 2. When operate or maintain the machine, all the safety rules and precautions must be observed. -
Page 7: Keep Alarm Of Fire
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL 15. Always travel with the load in a horizontal position. 16. Cleaning, lubricating or maintenance are forbidden while the machine is in operation, if needed the above actions must be done after the machine was stopped, engine off and ignition key taken away. -
Page 8: Get On/Off The Machine
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL burnt, distortion or explode, therefore relative precautions should be taken. GET ON/OFF THE MACHINE 1.2.3 1. Do not jump on/off the machine while it is running. Use the handle and the step to get on the machine, it is forbidden to grab any joysticks while getting on the machine. -
Page 9: Avoid Extrusion Danger
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL 3. Do not touch any heating parts after several hours’ work AVOID EXTRUSION DANGER 1.2.6 1. It is forbidden to stand under the working arm. 2. Do not let any parts of your body between parts which have relative motion to avoid injury. -
Page 10: Transport Safe
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL 10. If the engine was off on a slope, the emergency braking should be used and the working arm should be down. 11. When the machine can not move on muddy soft ground, you can try the way to increase the accelerograph, step down the travel pedal gradually and low the speed. -
Page 11: Section 2
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL SECTION 2 General characteristics and technical specifications FOREWORD ATTENTION The non-observance of what is described in this manual, incorrect operation or wrongly use the machine and the execution of non-authorized workers, will cause the exclusion of warranty. -
Page 12: Machine Identification
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL covered by warranty. Transport to/from the workshop,the inactivity of the machine and any consequent damage, all transport, works and storage costs are excluded from the warranty too. 2. The warranty will invalidate -if accidents occur due to operator’s fault;... -
Page 13: Description And Use Of The Machine
-Manual of instructions for the use and maintenance of the engine; DESCRIPTION AND USE OF THE MACHINE The ER2500 multifunctional machine are a “CE” marked machine. The machine described in this manual is projected to be commanded by a single operator from the driving seat. -
Page 14: Interchangeable Equipments
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL conditions of use and characteristics of this machine. The multifunctional machine described in this manual is a machine convinced to be used for operations in agricultural fields, green spaces, construction sites and road yards. -
Page 15: Noise Risk
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL DANGER Each attachment refers to its norms of product. The tipping moment generated by the equipment installed on the machine must be lower than the one produced by the loads stated in the chart. The weight of the equipment installed on the machine must be considered as an applied tool. - Page 16 Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL - 13...
-
Page 17: Technical Specification
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION 2.5.1 Model ER2500 Max.length 5631 Max.width 1870 Max.height 2736 Turning angle 31° Speed km/h Weight kg 5100 Standard tire 16/70-20 Tire pressure bar Oil tank capacity Pressure bar Oil model(mineral oil) -
Page 18: Dimension
Telescopic boom Machine ER2500- THE OPERATOR’S MANUAL 2.5.2 DIMENSION Picture 2.5.2 - 15... -
Page 19: Section 3
Multifunction Machine ER2500- THE OPERATOR’S MANUAL SECTION 3 USE OF THE MACHINE ATTENTION Before operating the machine, verify that everything is in order, that the protections and the bonnet are installed and that all the elements subject to wear and deterioration are fully efficient. -
Page 20: Steering Wheel
Multifunction Machine ER2500- THE OPERATOR’S MANUAL 1. Steering wheel. 2. Combined instrument. 3. Combination switch 4. switch 5. Accelerator pedal 6. Brake pedal. 7. Electric Joystick. 8. Boom extension operating lever 9. Quick change operating lever. 10. Ignition key 11. Hand brake... -
Page 21: Brake Pedal
Multifunction Machine ER2500- THE OPERATOR’S MANUAL BRAKE PEDAL 3.1.6 Engage it when need to stop the machine. Electric joystick 3.1.7 3.1.2 Picture 1. F N R switch. Press it forward , the machine goes forwards. Press it rearward, the machine goes backwards. In middle position, it’s neutral gear. -
Page 22: Hydraulic Output Control Lever
Multifunction Machine ER2500- THE OPERATOR’S MANUAL 3.1.9 Hydraulic output control lever. Push it forwards, the quick hitch cylinder is engaged with the attachment, push it backwards, removes the attachment. ATTENTION When finish the action of the joystick or levers, make sure that they are at neutral position. -
Page 23: Before Use
Multifunction Machine ER2500- THE OPERATOR’S MANUAL When change the attachments, open the block valve, the plug pin will be retracted and extend by operating the PTO joystick. Attention: After changing the attachments, it is necessary to close the block valve. -
Page 24: Switching Off The Machine
Multifunction Machine ER2500- THE OPERATOR’S MANUAL freezing mixture; -While the machine is n operation, the operator must sit in the driving seat. ATTENTION BEFORE GETTING DOWN FROM THE MACHINE, THE OPERATOR MUST LOWER THE LIFTING ARM AND THE ATTACHED EQUIPMENT, STOP THE ENGINE AND APPLY THE HAND BRAKE , STOP THE ENGINE AND REMOVE THE IGNITION KEY. - Page 25 Multifunction Machine ER2500- THE OPERATOR’S MANUAL ATTENTION Before hooking, unhooking or using attachments, it is necessary to consult the relative instructions manual, lay down the accessory and stop the engine. The attachments must have proper protection. To assemble the equipment follow these steps: -Drive the machine close to the equipment;...
-
Page 26: Section 4
Multifunction Machine ER2500- THE OPERATOR’S MANUAL SECTION 4 MAINTENANCE GENERAL INSTRUCTIONS ATTENTION -The operating of maintenance and settings must be done when the machine is switch off. -Before proceeding with any operation, make sure the machine is on flat ground and apply brake block to prevent any movement. -
Page 27: Cooling Circuit
Multifunctional Machine ER2500- THE OPERATOR’S MANUAL the whole inside surface of the filtering cartridge until the dust is completely removed. If pressed air is not available, it’s sufficient to beat the cartridge on the palm of the hand. If the cartridge has greasy spots, wash with warm water and soft detergent;... -
Page 28: Electric Circuit
Multifunctional Machine ER2500- THE OPERATOR’S MANUAL ATTENTION Weekly check the oil level. Every 50 working hours change the oil. -Position an appropriate container under the lower cap on the back of the tank, remove the cap and let the content flow. -
Page 29: Lubrication
Multifunctional Machine ER2500- THE OPERATOR’S MANUAL In case of contact with eyes, wash with a lot of water and turn to the first aid. In case of substitution of a battery, make sure the poles are correct. A wrong connection could cause serious damages to the electric plants. -
Page 30: The Pressure Measurement
Multifunctional Machine ER2500- THE OPERATOR’S MANUAL Picture 4.8.1 B The greasing points showed in Picture 4.8.1B (the turning cylinder and the articulation) should be weekly greasing. 4.8.2 RECOMMENDED LUBRICANTS Hydraulic plants: PAKELO HYDRAULIC EP EXTRA S-AL 46 Cooling circuit: PAKELO RED ANTIFREEZE LONG LIFE THE PRESSURE MEASUREMENT They has pressure testing connector which can be easily to test the pressure. -
Page 31: Summary Table Maintenance
Multifunctional Machine ER2500- THE OPERATOR’S MANUAL 4.10 SUMMARY TABLE MAINTENANCE Every Every Every Every Every Every week year hours hours hours MACHINE Clean the machine Check the tires/tightening the wheel nuts Check the battery Check the level of hydraulic oil... -
Page 32: Section 5
Multifunctional Machine ER2500- THE OPERATOR’S MANUAL SECTION 5 SPARE PARTS SPARE PARTS Spare parts’ orders must be made to your provider or directly to the manufacturer, and must contain the following information: -Model, code and serial number of the machine noticeable in the plate attached to each equipment. - Page 33 Multifunctional Machine ER2500- THE OPERATOR’S MANUAL 50hours 250hours Note: Note: Date: Signature: Date: Signature: 450hours 650hours Note: Note: Date: Signature: Date: Signature: 850hours 1050hours Note: Note: Date: Signature: Date: Signature: 1250hours 1450hours Note: Note: Date: Signature: Date: Signature: - 30...
- Page 34 Multifunctional Machine ER2500- THE OPERATOR’S MANUAL - 31...
Need help?
Do you have a question about the ER2500 and is the answer not in the manual?
Questions and answers