Table of Contents
Advertisement
Before applying power
Important!
U.S.A., Canada, and Europe
Units
shipped
to the
U.S.A.
and
Canada
are
designed
for operation
on
120 volts AC
only.
Units shipped to European countries are designed
for operation on 220 volts AC only. These units
are not equipped
with an AC voltage selector
switch and the discussion of such a switch that
follows should be disregarded.
All other countries
Units shipped to countries other than the U.S.A.,
Canada,
and
Europe are equipped
with an AC
voltage selector switch on the bottom plate. Refer
to the following paragraph for the proper setting
of this switch.
AC voltage selection
This unit operates on
110 - 120 volts or 220 - 240
volts AC. The AC voltage selector switch on the bottom
plate is set to the voltage that prevails in the area to
which the unit is shipped. Before connecting the power
cord to your AC outlet, make sure that the setting posi-
tion of this switch matches your line voltage. If not, it
must be set to your voltage in accordance
with the
following direction.
Note:
Our warranty
does
not cover
damage
caused
by excessive
line
voltage due to improper setting of the AC voltage selector switch.
Safety precaution for AC plug (For Canada)
CAUTION:
TO PREVENT
ELECTRIC
SHOCK
DO NOT USE THIS (POLARIZED)
PLUG WITH
AN
EXTENSION
CORD,
RECEPTACLE
OR
OTHER
OUTLET
UNLESS
THE BLADES
CAN
BE FULLY
INSERTED
TO
PREVENT
BLADE
EXPOSURE.
Rear panel safety precautions
"
AC 110-120V~<» AC 220-240V~
AC 110-120V~<p AC 220-240V~
Switch lever
oS
This
shows
switch
lever
locked
in the
110 — 120 V~ posi-
tion.
This
shows
switch
lever
locked
in the
220 — 240 V~ posi-
tion.
Move
switch
lever to match
your
line
voltage with a small screwdriver or other
pointed tool.
AC voltage selector switch
WARNING:
TO
PREVENT
FIRE
OR
ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated ''dangerous voltage'' within the product's
enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
2 KVR-AQOR/KVB-A7ORIKR-A70 (K}
The exclamation point within an equilateral triangle is intended to alert the user to the
presence
of important
operating
and
maintenance
(servicing)
instructions
in the
literature accompanying the appliance.
Advertisement
Table of Contents
